Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 05-09-2014, 19:58   #1
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default Advice Needed

Hi everyone.. its been a while since ive posted on here but now im after some help and info on a few jobs that i need doing to my Terrano.
its had issues since the day i bought it last November which i was aware of which is why i got it for a very reasonable price. Anyway, any help or info on the following jobs would be gratefully received.

1) when i start it from cold or first start of the day it will splutter and then stall. if i hold the revs above 1000 rpm for about 5 secs after start up it splutters as usual but then all is ok.

2) sometimes when im pulling off from a junction or turning into a street the engine cuts out. It only does this if i let off the accelerator pedal and then press it again. Sometimes it does it when selecting gear from neutral to D or R (automatic gearbox)

3) when the gearbox reaches final gear at a around 55 mph i get a brief vibration from the gearbox. it feels like the gear is slipping before it engages properly. after that its smooth as anything.

4) Flexi exhaust pipe. is it a straight forward job as im doing it in the morning.

The first two faults do bring the management light on and always come up with injector needle lift sensor. but when i restart the engine it goes off and runs fine. sometimes it will go for weeks without cutting out and then it will do it 5 times in one journey. Its been doing it for the last 10 months since i bought it and never got any worse.

i was thinking of selling the car as ive had Terranos and Mavericks for the last 4 years and felt like a change but this car has so many positives aswell ie no rust or corrosion to the body, wings are solid and so is the whole of the floor and when it runs good its very nice to drive.

cheers in advance.
Attached Images
File Type: jpg t2.jpg (88.6 KB, 81 views)
spautoparts is offline   Reply With Quote
Old 05-09-2014, 20:18   #2
briggie
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2010
Location: peoples democratic republic of west yorkshire
Vehicle: " alice "
Posts: 10,473
Default

first 2 issues sound like fuel starvation to me , or air issues
briggie is offline   Reply With Quote
Old 05-09-2014, 20:28   #3
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

worth checking the glow plugs, you need to remove the intercooler and the link strap across the top of them, then with an ohm meter check the resistance, it should be zero ohms, or you can take a wire from the + on battery to each glow plug terminal good plug should produce a spark, bad plug nothing, if you have a DC amp meter capable of reading 20 plus amps then you can do the same test using this, if it pulls amps it is good if not it is bad, re stalling issue my money goes on the throttle thing above the pedal, but read the codes, re the auto box sounds like the direct drive clutch is hesitant, I am no expert on auto but worth checking the oil, this is done at idle in drive, low oil =problems as does oil that is not bright red, brown = burnt overheated, exhaust flexi is welded in so if you can weld then not a problem, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 05-09-2014, 20:32   #4
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

yes what Briggie says is just as valid, I get tunnel vision sometimes, or maybe it is the wine, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 05-09-2014, 20:34   #5
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

Quote:
Originally Posted by solarman216 View Post
worth checking the glow plugs, you need to remove the intercooler and the link strap across the top of them, then with an ohm meter check the resistance, it should be zero ohms, or you can take a wire from the + on battery to each glow plug terminal good plug should produce a spark, bad plug nothing, if you have a DC amp meter capable of reading 20 plus amps then you can do the same test using this, if it pulls amps it is good if not it is bad, re stalling issue my money goes on the throttle thing above the pedal, but read the codes, re the auto box sounds like the direct drive clutch is hesitant, I am no expert on auto but worth checking the oil, this is done at idle in drive, low oil =problems as does oil that is not bright red, brown = burnt overheated, exhaust flexi is welded in so if you can weld then not a problem, Rick
This kind of makes sense.
first of all the glowplug light on the dash only stays on for about a second before it goes out and i have suspected glowplugs but never changed them. As with the accelerator pedal it can be a bit hit and miss eg you push it slightly and nothing happens then you push it a little more and you jump forward rather than gradually pick up speed.
spautoparts is offline   Reply With Quote
Old 05-09-2014, 20:37   #6
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

Quote:
Originally Posted by briggie View Post
first 2 issues sound like fuel starvation to me , or air issues
where would be the best place to start with this. i have recently changed the fuel filter but it made no difference.
spautoparts is offline   Reply With Quote
Old 05-09-2014, 20:56   #7
briggie
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2010
Location: peoples democratic republic of west yorkshire
Vehicle: " alice "
Posts: 10,473
Default

good place to check is if the primer on top of the filter is going down , also if it has a mini filter , that might be blocked ...... could be crap in the tank ..... air filter dirty ...... even the dreaded diesel bug
briggie is offline   Reply With Quote
Old 05-09-2014, 21:04   #8
rustic
Senior Member
Click here to find out how to become a paid up member
 
rustic's Avatar
 
Join Date: Feb 2007
Location: Staffordshire
Vehicle: Maverick Mk I 2.7 TD LWB
Posts: 7,825
Default

Quote:
Originally Posted by spautoparts View Post
where would be the best place to start with this. i have recently changed the fuel filter but it made no difference.
Just a quick note, re fuel filters.
Sometimes cheap filters do not seal properly, and there is a chance that you have compounded the fault by introducing another one.
What some have done, is to replace some of the fuel line after the filter with clear pipe, and any air bubbles can be seen.
Air can be introduced by the fuel filter, or a rusted fuel line, or line on top of the tank.

The point to note, there is no fuel pump in a diesel fuel tank, and the main injector pump "sucks" the fuel, so any leak in the lines will take in air.
Also undo the fuel filler cap, you will probably hear a hiss as air is let into the tank.

Best regards,
Rustic
__________________
Ford Maverick GLX 1995 2.7TD LWB in illusion silver, 98k miles. Owned since new, for 22 years.
Best car I have ever owned.
Just wish I could drive it more.
rustic is offline   Reply With Quote
Old 05-09-2014, 21:49   #9
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

[QUOTEsometimesc;266607]Just a quick note, re fuel filters.
Sometimes cheap filters do not seal properly, and there is a chance that you have compounded the fault by introducing another one.
What some have done, is to replace some of the fuel line after the filter with clear pipe, and any air bubbles can be seen.
Air can be introduced by the fuel filter, or a rusted fuel line, or line on top of the tank.

The point to note, there is no fuel pump in a diesel fuel tank, and the main injector pump "sucks" the fuel, so any leak in the lines will take in air.
Also undo the fuel filler cap, you will probably hear a hiss as air is let into the tank.

Best regards,
Rustic[/QUOTE]

Yes.. sometimes I do get a hiss of air when I take the cap off but not every time
spautoparts is offline   Reply With Quote
Old 07-09-2014, 17:21   #10
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

Well heres an update.. Yesterday i changed the front pipe, the one with the flexi on and can honestly say it was a challenge. I managed to snap a stud on the manifold but fortunatly i got the rest of the stud out, re tapped the hole and put a bolt through it...... JOB DONE

Today i changed the fuel pipes to and from the filter with clear ones so i could check for an air leak. After fitting i primed the filter to get rid of as much air as possible then took it for a 10 minute drive. When i got back i checked again and the primer was solid and no air bubbles were present so i switched it off and left it for half an hour, came back and this is what i found..

http://youtu.be/IzYFxKqtnNE?list=UU6...a-96zDcynfmnhQ

Also the engine dosnt tick over very well. every now and then it dies off a bit and then goes back to normal. this must be to do with the air. Would this cause the engine to stall and bring up the needle lift sensor fault code?

I never knew diesel was blue
spautoparts is offline   Reply With Quote
Old 07-09-2014, 17:28   #11
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

So have I got this right, you came back to find air between the filter and the metal pipes that go to the tank?

Does this mean the pipes from the tank are buggered?
jims-terrano is offline   Reply With Quote
Old 07-09-2014, 17:32   #12
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

Quote:
Originally Posted by jims-terrano View Post
So have I got this right, you came back to find air between the filter and the metal pipes that go to the tank?

Does this mean the pipes from the tank are buggered?
I think it means there is air entering the fuel system somewhere. The clear pipes are fitted just before and just after the fuel filter so you could see if any air is being drawn through. It could be fuel pipes, fuel filter or filter housing
spautoparts is offline   Reply With Quote
Old 07-09-2014, 17:36   #13
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

you need to replace the two pipes right back to the tank, they are corroded and letting air in, the flow pipe goes to the filter head, the return which might not be leaking but will be in the same condition, goes from the injector pump back to the tank, I did the Mrs two with plastic all the way, just use many cable ties, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 07-09-2014, 18:12   #14
spautoparts
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2011
Location: East Midlands, Nottinghamshire
Vehicle: Terrano2.7 TDi SE 2005
Posts: 255
Default

Quote:
Originally Posted by solarman216 View Post
you need to replace the two pipes right back to the tank, they are corroded and letting air in, the flow pipe goes to the filter head, the return which might not be leaking but will be in the same condition, goes from the injector pump back to the tank, I did the Mrs two with plastic all the way, just use many cable ties, Rick
do you know what the internal diameter is for the pipe and what length for a lwb?
spautoparts is offline   Reply With Quote
Old 07-09-2014, 18:27   #15
kitchenman
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2011
Location: Essex Wescliff
Vehicle: maverick 1994 2.7 TD
Posts: 1,278
Default

If the primer is 'solid' does this mean hard down.
OK as you get a hiss from the filler cap then your vent in the cap is blocked
Banshee had the same problem
If the primer is hard down take off the filler cap, if it springs back then your major problem is blocked vent causing extra suction letting air in.
You will need to sort that either way, new pipes or not
kitchenman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 06:22.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums