Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 10-05-2014, 18:57   #1
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default Terrano broke down!!!

Right, so me n the missus have been doing some laning. Water bumper high on an occasion. Continued laning for ages, left and joined the m4

Cruising about 80-90.... Kph obviously

Incredibly heavy rain whilst driving, all of a sudden terrano started to drop power. Pulled in to hard shoulder foot flat to floor, no juddering or anything just revs dropping ect..

When w came to a stop the engine was idling sweet as a nut, put accelerator to floor and it would immediately climb to 1750rpm (again firing on all 4)

So we called rac (And rick )

Just before the rac man arrived we turned her back on to check and hey presto she was revving freely again.

Much earlier in the day the only thing we had done was put some injector cleaner in, and had some heavy rain on the m4

I did check any pipes I could see as did the rac dude.

He also plugged in and no codes are present (also no engine light on during whole process)

We drove home and all is fine
AlexD333 is offline   Reply With Quote
Old 10-05-2014, 18:58   #2
Peasgood1
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2013
Location: Cheshire
Vehicle: '94 swb Terrano
Posts: 198
Default

Throttle sensor fault imo.
Peasgood1 is offline   Reply With Quote
Old 10-05-2014, 19:01   #3
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Quote:
Originally Posted by Peasgood1 View Post
Throttle sensor fault imo.
No engine management light?
AlexD333 is offline   Reply With Quote
Old 10-05-2014, 19:12   #4
Peasgood1
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2013
Location: Cheshire
Vehicle: '94 swb Terrano
Posts: 198
Default

Had the same symptoms once on my Mav but while it was stationary. No EML showing.
Never did it again
Peasgood1 is offline   Reply With Quote
Old 10-05-2014, 19:16   #5
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Quote:
Originally Posted by Peasgood1 View Post
Had the same symptoms once on my Mav but while it was stationary. No EML showing.
Never did it again
Ahh interesting. Perhaps this could be it.
AlexD333 is offline   Reply With Quote
Old 10-05-2014, 19:54   #6
clivvy
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2009
Location: Huddersfield
Vehicle: Terrano 03 LWB
Posts: 6,947
Default

I agree, but could it also be a slightly dodgy earth perhaps? the earth for the pedal is one of the two small wires on the block by the dip stick...
clivvy is offline   Reply With Quote
Old 10-05-2014, 20:16   #7
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Mine always seems to be very juddery in heavy rain, jump out turn my snorkel head round and all is well lol

I know this doesn't help you but thought I'd point this out
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Old 10-05-2014, 20:38   #8
R1cho
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2010
Location: Wales
Vehicle: 1997 LandCruiser Colorado
Posts: 4,201
Default

after watching the ford vid alex you hit that water a bit fast some of the water could have gone in the air intake and made the maf wet, could be wrong its just a thought
R1cho is offline   Reply With Quote
Old 10-05-2014, 20:59   #9
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

on phone you did not say you had been through water quite likely you soaked the paper air filter, the mist that it would then make would do what you say and no light, leaving it off in the hot/warm engine bay most likely evaporated or drained the water, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 10-05-2014, 22:11   #10
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Quote:
Originally Posted by solarman216 View Post
on phone you did not say you had been through water quite likely you soaked the paper air filter, the mist that it would then make would do what you say and no light, leaving it off in the hot/warm engine bay most likely evaporated or drained the water, Rick
The water wade was a good hour before the m4 journey, that's why I didn't mention
AlexD333 is offline   Reply With Quote
Old 10-05-2014, 22:42   #11
Lazy-Ferret
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
Default

the two times mine has done what you describe, it was the flexible pipes to the intercooler.... I had forgotten to do the jubilee clips up properly. Ironically, it ran for a few days before it decided to get me.
Lazy-Ferret is offline   Reply With Quote
Old 10-05-2014, 22:58   #12
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Quote:
Originally Posted by Lazy-Ferret View Post
the two times mine has done what you describe, it was the flexible pipes to the intercooler.... I had forgotten to do the jubilee clips up properly. Ironically, it ran for a few days before it decided to get me.
The inter cooler is only held on by two short stubby hoses right?
AlexD333 is offline   Reply With Quote
Old 10-05-2014, 23:23   #13
R1cho
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2010
Location: Wales
Vehicle: 1997 LandCruiser Colorado
Posts: 4,201
Default

2 hoses and 4 bolts
R1cho is offline   Reply With Quote
Old 10-05-2014, 23:27   #14
Lazy-Ferret
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
Default

Quote:
Originally Posted by R1cho View Post
2 hoses and 4 bolts
as he says, 4 bolts physically hold it in place, and 2 stocky hoses connect it to the manifold and turbo.

Nissan fit some awful wire pipe clips, which seem to allow the pipe to leak sometimes, so I changed mine for the proper Jubilee clips x 4.
Lazy-Ferret is offline   Reply With Quote
Old 10-05-2014, 23:48   #15
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Quote:
Originally Posted by Lazy-Ferret View Post
as he says, 4 bolts physically hold it in place, and 2 stocky hoses connect it to the manifold and turbo.

Nissan fit some awful wire pipe clips, which seem to allow the pipe to leak sometimes, so I changed mine for the proper Jubilee clips x 4.
Hmm, well these were the ones rick suggest i check today, I had a look and all seems solid, couldn't check for leaks though. May check when I fire her up tomorrow from cold. I should expect a blowing right?
AlexD333 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 13:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums