Terrano Wings

Paff · 28-04-2014, 14:43

How hard is it to change a front wing on a 2001 Y plate LWB Terrano? Are they bolted on?

zippy656 · 28-04-2014, 15:04

bolted

Paff · 28-04-2014, 17:29

Quote:

Originally Posted by zippy656

bolted

Good, so just need a donor vehicle then.

What sort of job are they?

clivvy · 28-04-2014, 17:39

very easy, but be careful - several bolts in the engine bay, then a couple of slightly awkward bolts between it and the door (open the door fully) then a couple down by the mud guard. When done, lift out slightly, unplug the indicator (if it has one) you will note there is a small ball-type fixing on the front corner of the wing - it kinda rotates a little, so pull that out as well (if memory serves me, there is a bolt also but I might be wrong...that's it.

Paff · 28-04-2014, 20:07

Tnx...

AlexD333 · 28-04-2014, 22:33

When are we getting pics paff?

Paff · 28-04-2014, 23:01

Quote:

Originally Posted by AlexD333

When are we getting pics paff?

Got to get the blinking thing yet, all my questions on here could come to nought. He said that he would get it MOT'd this week. I am away on holiday this Friday to Monday. I am a bit reluctant to ring him as he and his wife are quite poorly and she is having an operation next week.

solarman216 · 29-04-2014, 00:33

Sorry but this just sounds a bit doggy to me, Rick

Paff · 29-04-2014, 00:46

Quote:

Originally Posted by solarman216

Sorry but this just sounds a bit doggy to me, Rick

How so?

solarman216 · 29-04-2014, 00:52

you have yet to get the motor and you are looking for hard to get bits for it, but I have to admit to not reading posts fully, Rick

Paff · 29-04-2014, 01:12

Quote:

Originally Posted by solarman216

you have yet to get the motor and you are looking for hard to get bits for it, but I have to admit to not reading posts fully, Rick

Well I'm not on here for the benefit of my health

I like to get clued up, I'm not some sort of freak that likes to hang about on 4x4 forums

It's all out of my hands at the moment. It's a family member that is practically giving his Terrano away as he is too ill to drive it, said he will put a fresh MOT on it and I am waiting. But as I've said, I am not going to push it as they are both poorly. Shall I shut up until I get it?

Paff · 17-06-2014, 17:02

Just checking if I am allowed to post now solarman216?

Terrano is being picked up tomorrow morning, family member put a fresh MOT on it for me for no extra charge

Went through, but had to have £350 worth of welding on the chassis

So I should not be too dodgy now Rick

Anyway I will wait until I get the green light from the forum if I can post or not.

jims-terrano · 17-06-2014, 17:14

Dunno what may of gone on but dont worry water under bridge life is far too short for grudges. Concentrate on your new motor and im sure your family member will be taking comfort it has gone to you. Now get some pictures posted of it and the very best of luck with your new motor

Paff · 17-06-2014, 17:24

I will post some dirty pictures (not like that

) when I pick it up tomorrow as it's been stood for around a year.

Anyway I'll stop adding to this 'wings' thread

jims-terrano · 17-06-2014, 17:47

Before and after cleaning. Enjoy your car and enjoy the club.

28-04-2014, 14:43	#1
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	Terrano Wings How hard is it to change a front wing on a 2001 Y plate LWB Terrano? Are they bolted on?

29-04-2014, 00:33	#8
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	Sorry but this just sounds a bit doggy to me, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

29-04-2014, 00:52	#10
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	you have yet to get the motor and you are looking for hard to get bits for it, but I have to admit to not reading posts fully, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

17-06-2014, 17:02	#12
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	Can I post now? Just checking if I am allowed to post now solarman216? Terrano is being picked up tomorrow morning, family member put a fresh MOT on it for me for no extra charge Went through, but had to have £350 worth of welding on the chassis So I should not be too dodgy now Rick Anyway I will wait until I get the green light from the forum if I can post or not.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

28-04-2014, 15:04	#2
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	bolted

28-04-2014, 17:39	#4
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	very easy, but be careful - several bolts in the engine bay, then a couple of slightly awkward bolts between it and the door (open the door fully) then a couple down by the mud guard. When done, lift out slightly, unplug the indicator (if it has one) you will note there is a small ball-type fixing on the front corner of the wing - it kinda rotates a little, so pull that out as well (if memory serves me, there is a bolt also but I might be wrong...that's it.

28-04-2014, 20:07	#5
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	Tnx...

28-04-2014, 22:33	#6
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	When are we getting pics paff?

17-06-2014, 17:14	#13
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Dunno what may of gone on but dont worry water under bridge life is far too short for grudges. Concentrate on your new motor and im sure your family member will be taking comfort it has gone to you. Now get some pictures posted of it and the very best of luck with your new motor

17-06-2014, 17:24	#14
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	I will post some dirty pictures (not like that ) when I pick it up tomorrow as it's been stood for around a year. Anyway I'll stop adding to this 'wings' thread

17-06-2014, 17:47	#15
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Before and after cleaning. Enjoy your car and enjoy the club.