Clear PVC Piping for Fuel Filter Conversion

Banshee · 31-01-2014, 00:53

I'm now selling 1/2m lengths of 8mm ID Food Grade PVC piping for people who want to replace their Feed and Return pipes on their fuel filters for £3, this includes postage

Fantastic for seeing if there are any air leeks in your fuel lines, and great for those running veg as it is "food grade" meaning veg will not perish it like it does to rubber, one of the best mods I've done on my truck, it makes diagnosing possible fueling issues so much easier.

PM me if you're interested, plenty available, I can also cut to size so when you receive it's the right size for your Feed and Return already

Banshee · 31-01-2014, 17:25

I might post this in the oil section to as it might be of more interest in there

Terranical · 31-01-2014, 21:32

I could use a couple of cut-to-length pieces please, what's the cost and how do I pay?
Oh, and do you still have the handbook folder?
Cheers

Banshee · 01-02-2014, 15:50

Quote:

Originally Posted by Terranical

I could use a couple of cut-to-length pieces please, what's the cost and how do I pay?
Oh, and do you still have the handbook folder?
Cheers

Hi mate I was charging £3 for the pipe cut to size including postage but I can see how much the leather document holder and pipe will be to post together

Do you want to PM me the postcode of where you woukd like it to be sent to?

31-01-2014, 00:53	#1
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Clear PVC Piping for Fuel Filter Conversion I'm now selling 1/2m lengths of 8mm ID Food Grade PVC piping for people who want to replace their Feed and Return pipes on their fuel filters for £3, this includes postage Fantastic for seeing if there are any air leeks in your fuel lines, and great for those running veg as it is "food grade" meaning veg will not perish it like it does to rubber, one of the best mods I've done on my truck, it makes diagnosing possible fueling issues so much easier. PM me if you're interested, plenty available, I can also cut to size so when you receive it's the right size for your Feed and Return already __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! Last edited by Banshee; 25-07-2017 at 10:37.

31-01-2014, 17:25	#2
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	I might post this in the oil section to as it might be of more interest in there __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

31-01-2014, 21:32	#3
Terranical Senior Member Join Date: Jun 2010 Location: Resident in Bristol, Terrano in Spain Vehicle: 1994 Terrano 2.7TD SWB Posts: 1,398	I could use a couple of cut-to-length pieces please, what's the cost and how do I pay? Oh, and do you still have the handbook folder? Cheers