|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
28-02-2013, 13:45 | #1 |
Junior Member
Join Date: Feb 2013
Location: Wirral, northwest
Vehicle: Terrano
Posts: 4
|
New member with 2003 Terrano
Hi everyone
I am a new member with a 2003 Terrano (2.7) which was a very recent purchase. This is to be used mainly for boat towing and a bit of off roading. Everything seems fine although the clutch fluid needs replacing and a aux belt is a bit noisy. Does anyone know of a Nissan specialist or recommended garage in the Wirral, Cheshire and Wrexham area. I'd like to have these little bits sorted before any real use and abuse. Many thanks |
28-02-2013, 15:09 | #2 |
Senior Member
Join Date: Jul 2011
Location: cupar scotland
Vehicle: terrano II SWB 2.7 (2002)
Posts: 431
|
1st welcome to the club
why do you need a garage when you have this forum most of he things you need to fix ......everything can be found HERE : all the other idiots will along soon to help you out . pay your tenner .....sit back and enjoy the ride ? |
28-02-2013, 17:23 | #3 |
Junior Member
Join Date: Feb 2013
Location: Wirral, northwest
Vehicle: Terrano
Posts: 4
|
Hi, thanks for the welcome.
As a current user of both Saab and BMW forums such things are invaluable. I only hope this one is a bit less fascist that the BMW forum. The hints and advice are very helpful. My need for a trusted garage is time. I use a local Saab specialist and it's brilliant. |
28-02-2013, 18:23 | #4 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Welcome aboard, no facists here just loads of nutters now where is Zippy and Briggie
As you can tell theres a lot of banter, advice and workshop downloads. So why do you need the clutch fluid changing? Most of the belts are noisy, mine gets worse in the cold weather. |
28-02-2013, 18:46 | #5 |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
welcome im one of the other idiots lol you really dont want a garage these are simple to work on and help is always here sometime members on hete are willing to lend a helping hand had my clutch done ny the great rick n swifty
|
28-02-2013, 20:50 | #6 |
Junior Member
Join Date: Feb 2013
Location: Wirral, northwest
Vehicle: Terrano
Posts: 4
|
Hi, thanks for the replies. The clutch is very stiff to operate and the fluid looks in poor condition - very dark in colour. I'm hoping that the clutch itself isn't on the way out and or something else is wrong.
If anyone is local and can give me a wise opinion on this please let me know. |
28-02-2013, 23:01 | #7 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Have to say my clutch fluid was also black. I'd be giving the slave and master cylinders a quick dose of looking at. Theres a flexi hose on the slave cylinder, check it's condition. Also fastened on to the flexi there is a pipe that goes to the rear just above the rear axle that can rot out, this also has a bleed nipple on the end above rear axle. This is called a damper pipe but most of us on here remove this pipe.
|
28-02-2013, 23:59 | #8 |
Senior Member
Join Date: Jun 2010
Location: Dumfries and Galloway, Scotland
Vehicle: Nissan Terrano 2.7TD LWB
Posts: 8,024
|
Hello, welcome, I'm another weirdo you'll find a lit of good advice here
|
01-03-2013, 00:29 | #9 |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
i had the same thing tried everything else first then rick fitted a new clutch for me
|
01-03-2013, 21:56 | #10 |
Senior Member
Join Date: Jun 2011
Location: Nelson's County
Vehicle: TERRANO SWB 2.4 Petrol
Posts: 568
|
Welcome.
|
14-03-2013, 09:28 | #11 |
Junior Member
Join Date: Feb 2013
Location: Wirral, northwest
Vehicle: Terrano
Posts: 4
|
Hi everyone
My 2003 Terrano has just gone through its major service at 83K and with new battery, change of clutch fluid, fuel flush, oil change etc all seems to be fine. I bought a full high strength steel dog luggage guard - I'm going to moving compressed air diving cylinders. I am going to have the underside cleaned and sealed. Any other top tips for things to have done. I am going to mainly using it for launching and recovering a boat - someone suggested a front facing tow hitch but unlike landrover without a metal from bumber its a bit difficult to attach. Has anyone worked out how to set these up with day light running lights? Many thanks all, Liam |
14-03-2013, 10:21 | #12 |
Senior Member
Join Date: Feb 2012
Location: Staffs
Vehicle: '02 Terrano TDI sport lwb
Posts: 3,787
|
Are you launching into salt water ? If so be aware that these can suffer extreme rot in a short period and your first thing should be some serious under sealing
|
Thread Tools | |
Display Modes | |
|
|