advice on fitting roof rails

mikejcb · 12-08-2012, 20:52

Hi has anyone fitted roof rails to a terrano. i have a 04 swb an i have just recieved my rails off ebay, do i have to take the roof lining out as it looks alot of work. I was thinkin of just filling the holes in the lining with some plastic caps or somethink. also any advice will be really appreciated as im iching to get them on

Fez_uk · 12-08-2012, 20:57

just undo the edges of the lining, easy enough.

Some people use rivnuts, then you would not have to. But I'd still like to know where I am drilling.

mikejcb · 12-08-2012, 21:02

hello mate thanks, can you tell me more about these rivnuts what do they do , do they callapse when they tighten

Fez_uk · 12-08-2012, 21:06

have a google, better than me explaining.

stinka · 12-08-2012, 21:13

I did mine bolted through with large body repair washers, wouldn't use rivnuts tbh

headlining takes about 20 mins to drop out with hand tools, piece of piss

http://www.nissan4x4ownersclub.com/f...t=15724&page=2

mikejcb · 12-08-2012, 21:56

Stinka wish you as closer to me id pay you to do it

are the rivets ive got as they look reall solid these thing

mikejcb · 12-08-2012, 22:29

superb stinka

mikejcb · 13-08-2012, 22:00

Hi thanks very much for the kind advice everyone, i have just paid my £10 it's well worth it , niceone guys

96terrano · 13-08-2012, 22:04

yup, the way stinka did it is the best, i done it the same way also

12-08-2012, 20:52	#1
mikejcb Junior Member Join Date: Dec 2010 Location: st helens Vehicle: 04 swb terrano Posts: 22	advice on fitting roof rails Hi has anyone fitted roof rails to a terrano. i have a 04 swb an i have just recieved my rails off ebay, do i have to take the roof lining out as it looks alot of work. I was thinkin of just filling the holes in the lining with some plastic caps or somethink. also any advice will be really appreciated as im iching to get them on

12-08-2012, 22:29	#7
mikejcb Junior Member Join Date: Dec 2010 Location: st helens Vehicle: 04 swb terrano Posts: 22	stinka superb stinka

13-08-2012, 22:00	#8
mikejcb Junior Member Join Date: Dec 2010 Location: st helens Vehicle: 04 swb terrano Posts: 22	roof bars Hi thanks very much for the kind advice everyone, i have just paid my £10 it's well worth it , niceone guys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-08-2012, 20:57	#2
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	just undo the edges of the lining, easy enough. Some people use rivnuts, then you would not have to. But I'd still like to know where I am drilling.

12-08-2012, 21:02	#3
mikejcb Junior Member Join Date: Dec 2010 Location: st helens Vehicle: 04 swb terrano Posts: 22	hello mate thanks, can you tell me more about these rivnuts what do they do , do they callapse when they tighten

12-08-2012, 21:06	#4
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	have a google, better than me explaining.

12-08-2012, 21:13	#5
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	I did mine bolted through with large body repair washers, wouldn't use rivnuts tbh headlining takes about 20 mins to drop out with hand tools, piece of piss http://www.nissan4x4ownersclub.com/f...t=15724&page=2

12-08-2012, 21:56	#6
mikejcb Junior Member Join Date: Dec 2010 Location: st helens Vehicle: 04 swb terrano Posts: 22	Stinka wish you as closer to me id pay you to do it are the rivets ive got as they look reall solid these thing

13-08-2012, 22:04	#9
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	yup, the way stinka did it is the best, i done it the same way also