I want your nuts

clivvy · 05-01-2012, 21:47

Hey Guys!!

anyway, I really need some new wheel nuts, I found a few on mine that are lacking in thread, so I want to replace either most or all of them, cheap!

anyone got any going cheaps?

thanks!

11redrex · 05-01-2012, 21:57

I did have a full set here somewhere. I'll have a look tomorrow, yours if I've got em. (although I probably gave them away when I sold the T2 last year.)

WHO DID I GIVE ALL THAT STUFF TOO ?????!!!!!

clivvy · 05-01-2012, 21:57

jolly good of you, fingers crossed!

Fez_uk · 05-01-2012, 22:23

have a look at some scrap yards

zippy656 · 05-01-2012, 22:43

if you got damaged nuts maybe the studs could do with looking at and changing too?!?

just an idea...

96terrano · 05-01-2012, 22:58

Yes, I also need some nuts, some of mine are chrome and some are rusted ones from steel wheels

harlowmaverick · 06-01-2012, 08:34

Adz has some, don't know if he wants to part with them though.
Pm him

clivvy · 06-01-2012, 09:27

studs look ok Zippy, but the threads on the nuts are, well, none existent. Lucky the studs are made from much stronger metal than the bolts, so most likely this has been caused by an unfriendly impact wrench. I have been able to fit and tighten some spare nuts in place, so HOPEFULLY these spare nuts havent made things worse!

I wont PM Adz as he has left the club I believe, and I will check the scrappies when I can. Are the wheel nuts generic? Can I get some from anywhere?

rayf3262 · 06-01-2012, 13:58

Quote:

Originally Posted by clivvy

Are the wheel nuts generic? Can I get some from anywhere?

M12 Metric fine pitch (1.25)

11redrex · 06-01-2012, 14:39

R1cho had all my old spare parts, he's no longer a member but someone might still have contact details for him ?

Terranical · 06-01-2012, 15:31

60 degree angle on the seat.

If anyone is interested I have 40 almost new chrome Terrano wheel nuts (non-original) I will sell on my return from Spain end of next week. They are open-ended, not domed as per the originals. I bought them in Spain (in sets of 20, so I had to buy two sets) to enable me to bring my originals back to the UK for refurbishing - that's done now, so I have no further use for them. I paid 35€ for them (around £30) and would accept £15 for the lot.
Because they are extremely heavy collection would be best, but I can post them at cost (guesstimate of around £8 or £9) PM if you're interested.
Cheers
Terranical
(Bruce)

11redrex · 25-01-2012, 19:02

Did you get some nuts Clivvy ? Found the old ones I knew I had today. Anyone seen my ball joint splitter ?

clivvy · 25-01-2012, 21:35

not yet dude, i THINK im getting a set from MakeitFit..

11redrex · 26-01-2012, 10:12

ok mate well they're here/if you need em. Bare in mind I don't know waht wheels they were holding on - I bought them from a breakers.

rustic · 26-01-2012, 12:14

Quote:

Originally Posted by 11redrex

ok mate well they're here/if you need em. Bare in mind I don't know waht wheels they were holding on - I bought them from a breakers.

redrex, your next post will be your 1000th

What do you think of that......?

05-01-2012, 21:47	#1
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	I want your nuts Hey Guys!! anyway, I really need some new wheel nuts, I found a few on mine that are lacking in thread, so I want to replace either most or all of them, cheap! anyone got any going cheaps? thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2012, 21:57	#2
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	I did have a full set here somewhere. I'll have a look tomorrow, yours if I've got em. (although I probably gave them away when I sold the T2 last year.) WHO DID I GIVE ALL THAT STUFF TOO ?????!!!!!

05-01-2012, 22:23	#4
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	have a look at some scrap yards

05-01-2012, 22:43	#5
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	if you got damaged nuts maybe the studs could do with looking at and changing too?!? just an idea...

05-01-2012, 22:58	#6
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	Yes, I also need some nuts, some of mine are chrome and some are rusted ones from steel wheels

06-01-2012, 08:34	#7
harlowmaverick Senior Member Join Date: Jun 2009 Location: Harlow, Essex Vehicle: Nissan Terrano 3.0 tdi 03 Posts: 962	Adz has some, don't know if he wants to part with them though. Pm him

06-01-2012, 09:27	#8
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	studs look ok Zippy, but the threads on the nuts are, well, none existent. Lucky the studs are made from much stronger metal than the bolts, so most likely this has been caused by an unfriendly impact wrench. I have been able to fit and tighten some spare nuts in place, so HOPEFULLY these spare nuts havent made things worse! I wont PM Adz as he has left the club I believe, and I will check the scrappies when I can. Are the wheel nuts generic? Can I get some from anywhere?

06-01-2012, 14:39	#10
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	R1cho had all my old spare parts, he's no longer a member but someone might still have contact details for him ?

06-01-2012, 15:31	#11
Terranical Senior Member Join Date: Jun 2010 Location: Resident in Bristol, Terrano in Spain Vehicle: 1994 Terrano 2.7TD SWB Posts: 1,398	60 degree angle on the seat. If anyone is interested I have 40 almost new chrome Terrano wheel nuts (non-original) I will sell on my return from Spain end of next week. They are open-ended, not domed as per the originals. I bought them in Spain (in sets of 20, so I had to buy two sets) to enable me to bring my originals back to the UK for refurbishing - that's done now, so I have no further use for them. I paid 35€ for them (around £30) and would accept £15 for the lot. Because they are extremely heavy collection would be best, but I can post them at cost (guesstimate of around £8 or £9) PM if you're interested. Cheers Terranical (Bruce)

25-01-2012, 19:02	#12
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Did you get some nuts Clivvy ? Found the old ones I knew I had today. Anyone seen my ball joint splitter ?

25-01-2012, 21:35	#13
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	not yet dude, i THINK im getting a set from MakeitFit..

26-01-2012, 10:12	#14
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	ok mate well they're here/if you need em. Bare in mind I don't know waht wheels they were holding on - I bought them from a breakers.