Current job - Page 4

solarman216 · 12-02-2017, 00:22

Well we got there in the end, opening day tomorrow Sunday

solarman216 · 12-02-2017, 00:24

Changing the blue down/up lights for white

solarman216 · 12-02-2017, 00:25

Finished bar

solarman216 · 12-02-2017, 00:27

Entrance with that steel frame now with lights on

solarman216 · 12-02-2017, 00:32

RELAX, ten mins after leaving here we were in the steak house enjoying a beautiful steak with family as it is just two days till our daughters birthday, and wife and I will be one of the first customers tomorrow in the Tapas, next week I have full CH to install, pics of that later, Rick

Blocky10 · 12-02-2017, 02:50

Well done Rick. A well earned scotch or two

terranosaurusdoug · 12-02-2017, 03:39

Quote:

Originally Posted by solarman216

Changing the blue down/up lights for white

TERRANO POWER!!!!!!

What were those letters like to put up in the end Rick??

solarman216 · 12-02-2017, 04:24

As it happens not too bad, one of the lads had a 10ft span alloy tower and him being much younger than me elected to set it out on the floor and measure the fixing holes for each letter then transposed those onto the fascia and it all worked well, with a couple of helpers to hold the other letters as each one was fixed, then lecy guy hooked them up, I was more impressed with the 3 phase coffee machine conversion to single phase, turned out that the heater was 440 volt (two phase) so I wired it up live through the solid state relay and neutral thinking it will take forever to heat up on 230v but no it works really well, designed to produce 500 plus cups per day but we do not need anything like that so well within the needs of this job, yes I am still awake and on the scotch winding down, Mrs motor up for MOT soon so Sunday have to look it over, I know it has an ABS fault as pulled the fuse ages ago, Rick

terranosaurusdoug · 12-02-2017, 08:48

You deserve a good wind down, after that CH book yourself some time in the mud, jobs like that aren't nearly as enjoyable as what you have just been doing so you'll be ready for it. Good news re coffee machine and even better measuring for the sign

very easy to cock up, sounds like you have a good team Rick.

solarman216 · 13-02-2017, 00:09

Opening night and it was packed, we did not arrive till 7.30 and no tables spare, all we could have was the Relax sofa in my last pic, bit low down for eating, took some pics on my phone but not good enough to put up here (low light) forgot camera, anyway good food and a nice evening, although a tad noisy for us, Rick

macabethiel · 13-02-2017, 23:47

Must be great seeing the finished product very satisfying.

12-02-2017, 04:24	#53
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	As it happens not too bad, one of the lads had a 10ft span alloy tower and him being much younger than me elected to set it out on the floor and measure the fixing holes for each letter then transposed those onto the fascia and it all worked well, with a couple of helpers to hold the other letters as each one was fixed, then lecy guy hooked them up, I was more impressed with the 3 phase coffee machine conversion to single phase, turned out that the heater was 440 volt (two phase) so I wired it up live through the solid state relay and neutral thinking it will take forever to heat up on 230v but no it works really well, designed to produce 500 plus cups per day but we do not need anything like that so well within the needs of this job, yes I am still awake and on the scotch winding down, Mrs motor up for MOT soon so Sunday have to look it over, I know it has an ABS fault as pulled the fuse ages ago, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

13-02-2017, 00:09	#55
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	Opening night and it was packed, we did not arrive till 7.30 and no tables spare, all we could have was the Relax sofa in my last pic, bit low down for eating, took some pics on my phone but not good enough to put up here (low light) forgot camera, anyway good food and a nice evening, although a tad noisy for us, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

13-02-2017, 23:47	#56
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	Looks good ! Must be great seeing the finished product very satisfying.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-02-2017, 02:50	#51
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Well done Rick. A well earned scotch or two

12-02-2017, 08:48	#54
terranosaurusdoug Senior Member Join Date: Sep 2014 Location: Yorkshire, J33 M62 Vehicle: 2000 Terrano lwb 2.7TDI Posts: 5,500	You deserve a good wind down, after that CH book yourself some time in the mud, jobs like that aren't nearly as enjoyable as what you have just been doing so you'll be ready for it. Good news re coffee machine and even better measuring for the sign very easy to cock up, sounds like you have a good team Rick.