17 inches... - Page 4

The Patrolman · 08-06-2014, 21:40

re fixed the Bump stops wit a bit of CT-1

still got about 5" before they come in to play.
So may only need a 5" body lift

The Patrolman · 23-07-2014, 19:46

Further progress

I have aquired a 3rd matching 37 x12.5 x17.
New and delivered for£110

but still les than half price
so that makes 3 for £160 and an average of £53 each instead of £248.

As for the wings

the grinder it is.

instead of enlarging the opening by running the grinder all the way around the arch I plan to chop a section from the top centre ofthe arch and move it back by about 2" and then infill a small gap and re finnish.

Retining the good arches, arch liners and as i have 2 sets of spats it should look standard

The Patrolman · 09-08-2014, 20:15

A Trip to the tyre yard. Not what the lad needed with a Hangover....Crack on son!!!

6 off the rims and 3 on £30

The Patrolman · 09-08-2014, 20:16

So a quick check that the rears fit ok

Yep! it's a bit whacky races but they're on at the back

The Patrolman · 09-08-2014, 20:18

Crunch time

Do I or Don't I cut the shiny arches

Yes I do

A quick mark up with the old Gaffa tape

The Patrolman · 09-08-2014, 20:21

A Tickle with the grinder and

The Patrolman · 09-08-2014, 20:24

A little bit of welding and grinding later a 2" in fill bit of stainless and we're looking good

The Patrolman · 09-08-2014, 20:26

Slap on a bit of filler and a new wheel

The Patrolman · 09-08-2014, 20:27

Looking a bit Wonkey

The Patrolman · 09-08-2014, 20:30

Turn around and repeat

A bit quicker this Time..and that's enough for today

bry · 09-08-2014, 20:48

Ya doing a great job there..

Fez_uk · 10-08-2014, 01:38

Icelandic!!!

AlexD333 · 10-08-2014, 09:34

Absolute monster!!!

loving it!!!

Whats the power n gearing like?

The Patrolman · 10-08-2014, 09:35

Thanks Fez.

The Patrolman · 10-08-2014, 09:36

Quote:

Originally Posted by AlexD333

Absolute monster!!!

loving it!!!

Whats the power n gearing like?

Drives really nicely

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2014, 21:40	#46
The Patrolman Senior Member Join Date: Nov 2009 Location: Redcar, Teesside Vehicle: Y60 Patrol 4.2 PeTroll Posts: 2,122	re fixed the Bump stops wit a bit of CT-1 still got about 5" before they come in to play. So may only need a 5" body lift

23-07-2014, 19:46	#47
The Patrolman Senior Member Join Date: Nov 2009 Location: Redcar, Teesside Vehicle: Y60 Patrol 4.2 PeTroll Posts: 2,122	Further progress I have aquired a 3rd matching 37 x12.5 x17. New and delivered for£110 but still les than half price so that makes 3 for £160 and an average of £53 each instead of £248. As for the wings the grinder it is. instead of enlarging the opening by running the grinder all the way around the arch I plan to chop a section from the top centre ofthe arch and move it back by about 2" and then infill a small gap and re finnish. Retining the good arches, arch liners and as i have 2 sets of spats it should look standard

09-08-2014, 20:48	#56
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	Ya doing a great job there..

10-08-2014, 01:38	#57
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,644	Icelandic!!!

10-08-2014, 09:34	#58
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Absolute monster!!! loving it!!! Whats the power n gearing like?