Breaking Terrano 2 and Mavericks

[sperko]

Hi cncfabs Looking for 1999 T2 RHD rear door central locking actuator / selonoide

Cheers Brian

[post2124]

Hi cncfabs looking for a drivers side seat belt for middle row seats do you have any left?

[Ted]

Hi I am looking for a steel rim to suit a 215 x 15tyre as the spare that came with the vehicle turned out to be an alloy when I took the wheel cover off. Also as wife is a member of the the little legs tribe, a side step would assist her greatly. Thanks.

[Ted]

Also do you have a back box, centre and front section exhaust for a 1993 2.7 TD long wheelbase please?

[cncfabs]

Originally Posted by TED

Also do you have a back box, centre and front section exhaust for a 1993 2.7 TD long wheelbase please?

PM sent.

[cncfabs]

Any parts required let me know currently complete but engine no good headgasket gone driven without water otherwise really good condition for age

[makeitfit]

Yes please, I need a rad, a left hand engine mount, left and right hand lower wishbones and comp rods
Decided to rebuild mine now

[Sampraz]

Hi,

I'm still after a front driver's wing for a square healight model if you have one? As before would need postage to Northern Ireland.

BTW - do you know if the square and round headlight models have the same wings or are they shaped differently on the newer ones?

Thanks,
Darren

[solarman216]

Timothy52 is looking for a diff/axle, but his diff is built into the axle housing with an access plate on the rear, most Terrano's I have seen are conventional diff's as a unit from the front , do you know if the complete axle will fit? his is a 2003 2.7, Rick

[Chaz]

Im after a rear load cover for 2003 Terrano II LWB

Chaz

[post2124]

If your looking for parts at a good price and a great service then cncfabs is the man
paypal yesterday belt arrived north of scotland and fitted today
cheers
billy

[norrie]

hi need oilfillter bracket dont now if they are all the some mines 2000 model

[cncfabs]

Originally Posted by Chaz

Im after a rear load cover for 2003 Terrano II LWB

Chaz

Sorry ive never even seen one of those

[cncfabs]

Originally Posted by solarman216

Timothy52 is looking for a diff/axle, but his diff is built into the axle housing with an access plate on the rear, most Terrano's I have seen are conventional diff's as a unit from the front , do you know if the complete axle will fit? his is a 2003 2.7, Rick

Sorry i dont know for sure

[cncfabs]

Originally Posted by Sampraz

Hi,

I'm still after a front driver's wing for a square healight model if you have one? As before would need postage to Northern Ireland.

BTW - do you know if the square and round headlight models have the same wings or are they shaped differently on the newer ones?

Thanks,
Darren

Have good rust free one in red £30 as for postage i wouldnt want to be responsible but can wrap if you want to arrange courier.