My cellar-office conversion - Page 2

jims-terrano · 26-10-2014, 23:38

Whats wdp? Im assuming the sloping threshold will be under the bedroom carpet?

Cheers

makeitfit · 27-10-2014, 00:03

Sorry, Weather and Boil Proof ply . Easily good enough for your needs. Marine ply has different glue and better quality ply layers and virtually waterproof. WBP will be virtually as strong and almost as water resistant but once in place where's the water issue ?
Threshold graduates between carpeted bit and raised level of wet floor bit and so yes partially covered at least by carpet

jims-terrano · 27-10-2014, 00:06

Cheers Pete, now all I need is some enthusiasm and cash

makeitfit · 27-10-2014, 00:10

Quote:

Originally Posted by jims-terrano

Cheers Pete, now all I need is some enthusiasm and cash

I have enthusiasm and no cash

SO what you need to do is create your pl;an/desire and then a shopping list. Enter searches on fleabay and save them. Checkout local faceache sales and swap pages etc. gradually you'll be able to pick up bargains along the way. Put a wanted post up etc Eventually you'll have most of what you need and then you can hit the task

GFI

makeitfit · 28-10-2014, 23:37

Got some time on the desk bit today and did this

It's all cut from one sheet of 25 mm ply and so all the grain goes the same way

First run round with the router

Then a quick trim off the edge , chamfer style

Started the oiling job after a good sanding but a bit difficult to take a good enough pic for you.

Got the sofa bed in , just

At this rate we'll be able to eat off table in the kitchen without fending off avalanches of receipts and kitchen plans

Shelf racking etc next and some PC plumbing to do before the books start to flood in , boom boom

Fez_uk · 29-10-2014, 10:11

Neat little space that mate

solarman216 · 30-10-2014, 00:21

Nice work Pete, I got to do new kitchen soon for the boss, will post pics then, but not in your caliber, Rick

makeitfit · 30-10-2014, 00:30

Quote:

Originally Posted by solarman216

Nice work Pete, I got to do new kitchen soon for the boss, will post pics then, but not in your caliber, Rick

I'm sure you know what you're upto mate

Good luck with it ? Is it to be done for Crimbo

solarman216 · 30-10-2014, 00:47

Quote:

Originally Posted by makeitfit

Is it to be done for Crimbo

yep that is the plan

, Rick

makeitfit · 01-11-2014, 01:20

Looking a bit more lived in now as the books are going in

Special beer shelf seems to holding up

A bit more alu folded to make shelves and the files will be off the kitchen table

Beer o'clock is calling so just bunged some file boxes off the table to keep her indoors happy

It'll never look this tidy again by the way

solarman216 · 01-11-2014, 02:19

very nice, do you have a ready supply of ali checker plate? Rick

makeitfit · 01-11-2014, 02:25

Yerp, the blacksmith up the road has it and a very big folder

I theme kind of developed

but there's no messin' now it IS a man cave

exosteve · 01-11-2014, 02:43

Ffs.thats wicked.

johnb5177 · 01-11-2014, 11:03

Looking really cool, like it.....I know the feeling about the kitchen table filing system......I made a space upstairs.......now my splicing jobs and saw parts are not part of mealtimes......result...

makeitfit · 01-11-2014, 20:43

Quote:

Originally Posted by johnb5177

Looking really cool, like it.....I know the feeling about the kitchen table filing system......I made a space upstairs.......now my splicing jobs and saw parts are not part of mealtimes......result...

Been on a sailing course today but the wife has been clearing and filing

We have even found in all the detritus a GENUINE Windows 95 disc and cert

Space appearing as quick as my Brownie points just now

28-10-2014, 23:37	#20
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Desk update . Got some time on the desk bit today and did this It's all cut from one sheet of 25 mm ply and so all the grain goes the same way First run round with the router Then a quick trim off the edge , chamfer style Started the oiling job after a good sanding but a bit difficult to take a good enough pic for you. Got the sofa bed in , just At this rate we'll be able to eat off table in the kitchen without fending off avalanches of receipts and kitchen plans Shelf racking etc next and some PC plumbing to do before the books start to flood in , boom boom

30-10-2014, 00:21	#22
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Nice work Pete, I got to do new kitchen soon for the boss, will post pics then, but not in your caliber, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

01-11-2014, 02:19	#26
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	very nice, do you have a ready supply of ali checker plate? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26-10-2014, 23:38	#16
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Whats wdp? Im assuming the sloping threshold will be under the bedroom carpet? Cheers

27-10-2014, 00:03	#17
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Sorry, Weather and Boil Proof ply . Easily good enough for your needs. Marine ply has different glue and better quality ply layers and virtually waterproof. WBP will be virtually as strong and almost as water resistant but once in place where's the water issue ? Threshold graduates between carpeted bit and raised level of wet floor bit and so yes partially covered at least by carpet

27-10-2014, 00:06	#18
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Cheers Pete, now all I need is some enthusiasm and cash

29-10-2014, 10:11	#21
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Neat little space that mate

01-11-2014, 01:20	#25
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Looking a bit more lived in now as the books are going in Special beer shelf seems to holding up A bit more alu folded to make shelves and the files will be off the kitchen table Beer o'clock is calling so just bunged some file boxes off the table to keep her indoors happy It'll never look this tidy again by the way

01-11-2014, 02:25	#27
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Yerp, the blacksmith up the road has it and a very big folder I theme kind of developed but there's no messin' now it IS a man cave

01-11-2014, 02:43	#28
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	Ffs.thats wicked.

01-11-2014, 11:03	#29
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Looking really cool, like it.....I know the feeling about the kitchen table filing system......I made a space upstairs.......now my splicing jobs and saw parts are not part of mealtimes......result...