Breaking Terrano 2 and Mavericks - Page 17

06-05-2010, 19:40

looking for some good front and rear seats for 03 terrano any chance rob.,

cncfabs · 06-05-2010, 20:05

Quote:

Originally Posted by rob.twigg

looking for some good front and rear seats for 03 terrano any chance rob.,

Sorry i dont have a good interior at the moment

(RIP) PLANK · 11-05-2010, 23:15

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

cncfabs · 12-05-2010, 20:32

Quote:

Originally Posted by PLANK

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

May have the belts are they like the rears in swb or the lwb type

dave36 · 12-05-2010, 20:47

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?

cncfabs · 12-05-2010, 21:30

Quote:

Originally Posted by dave36

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?

Yes i did get your pm found one just got to remember where i put it will check tomorrow

MontysMaverick · 12-05-2010, 21:35

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

cncfabs · 12-05-2010, 21:39

Quote:

Originally Posted by MontysMaverick

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

Will check tomorrow should have but not sure what the part is until i look

MontysMaverick · 12-05-2010, 22:03

Quote:

Originally Posted by cncfabs

Will check tomorrow should have but not sure what the part is until i look

thanks matey if you do have 1, pm me please and we can arrange payment and postage etc, it looks about 1.5 inches round and is in the cup after you take the 2nuts off the top of the torsion bar mechanism near the gearbox end, Hope this helps

12-05-2010, 22:24

I would like the walnut centre console trims if they are available

BongoBerry · 12-05-2010, 23:32

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

BongoBerry · 13-05-2010, 07:05

Quote:

Originally Posted by Slug32

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

make that rims not wheels, will replace the tyres with new ones

BongoBerry · 13-05-2010, 07:39

add to that
- a-bar
- side steps

all for 1998 2 door T2

cncfabs · 13-05-2010, 18:34

Quote:

Originally Posted by Slug32

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

Hello
Have alloys and steel available depends what you want you can have the steels for £10 set good alloys £85 dont have bull bar or side steps already sold them (wheels will come with tyres)

BongoBerry · 13-05-2010, 18:37

16" steels (need 5) would prefer in decent condition....

12-05-2010, 20:47	#245
dave36 Member Join Date: Aug 2009 Location: Bristol Vehicle: Mistral Posts: 68	plastic bit grey moulding over rear view mirror, containing roof open switch and 2 map light switches mine well smashed up during gearbox repair any chance?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2010, 19:40	#241
rob.twigg Guest Posts: n/a	looking for some good front and rear seats for 03 terrano any chance rob.,

11-05-2010, 23:15	#243
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

12-05-2010, 21:35	#247
MontysMaverick Senior Member Join Date: May 2010 Location: staffordshire Vehicle: ford maverick 2.7 td Posts: 374	cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

12-05-2010, 22:24	#250
DingDong Guest Posts: n/a	I would like the walnut centre console trims if they are available

12-05-2010, 23:32	#251
BongoBerry Senior Member Join Date: Dec 2006 Location: Kenley, Surrey Vehicle: Patrol 4.8l & Terrano 2 Posts: 307	looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left) also looking for LWB springs for the rear ...

13-05-2010, 07:39	#253
BongoBerry Senior Member Join Date: Dec 2006 Location: Kenley, Surrey Vehicle: Patrol 4.8l & Terrano 2 Posts: 307	add to that - a-bar - side steps all for 1998 2 door T2

13-05-2010, 18:37	#255
BongoBerry Senior Member Join Date: Dec 2006 Location: Kenley, Surrey Vehicle: Patrol 4.8l & Terrano 2 Posts: 307	16" steels (need 5) would prefer in decent condition....