Identify Year of Manufacture?

Andymic · 13-06-2010, 11:53

Hope this isn't off topic.

Is there any way I can identify the exact model and year of manufature of my Mistral R20?

It's not a UK vehicle and the details off the chassis plate are:

Y-R20
R20-402846

B08775 CK7 K
TVPURPAR20TDA

Thanks in advance
Andy

zippy656 · 13-06-2010, 15:09

you could try this.

pull out your ash tray

turn over

as you see mine has a lable with date of USE..

also teh small round clock like thing shows when the ASH tray was made.

im guessing theyll not have them hanging about for ages..

Andymic · 13-06-2010, 15:21

Right oh.

Sticker has gone although there is a nice shiny label shaped residue there.
Was manufacture 3/94 so I'll take a guess the car is a 94 or 95

Andy

zippy656 · 13-06-2010, 15:55

id say 94. not going to have bits hanging about to long.

Andymic · 13-06-2010, 21:21

OK, got the log book tonight but it is in Greek.

Says first registered 1/10/95 and manufacured 1/1/95 (I think!!) so I guess it was made during 1994.

A good start......

Now I need to get a few parts to get everything working properly and get rid of the radio/cassette for a radio/cd player.

Thanks for the 'heads up'

zippy656 · 13-06-2010, 21:36

http://www.eurocarparts.com/ecp/p/Ca.../Service-Parts

what bits you after???

where in london are you. I used to live north west area, close to Barnet.

Andymic · 13-06-2010, 21:41

Zippy

Not much really, I need some new washer nozzles, offside rear lens (cracked) and some bulbs for the instrument panel.

I live in Harrow, so not a million miles from Barnet, although I'm in Cyprus at the moment (quick break).

Andy

zippy656 · 13-06-2010, 21:48

have a search for a member cncfab. he has a few bits most of the time. darwin for bulbs / leds..

ive not been in barner for over 20 years.. ( yes IAM that old )

so is it raining in Cyprus then?

Andymic · 13-06-2010, 21:55

Well,
We had thunder and lightning on Thursday but it was great on Friday and all weekend.
I'm back on Tuesday so I won't see the Mistral again until August. Still, it gives me plenty of time to get the bits together and something to do whilst the wife is sunbathing when we come back.

Do you know if there is a radio/cd palyer that will connect straight into the existing loom without me having to 'hack' the connectors?

Barnet is still a great place.
The students at Barnet college have made a big thing of painting patterns on all the chewing gum stuck to the pavement. I'm up there reasonably often as my accountants are on Wood Street.

Andy

zippy656 · 13-06-2010, 22:03

ooh right, so what do you do then??

swoping radio / cd player is simple. even I did it!! so got to be. need the right ISO lead for the car make and model. ebay or halfords if you got cash to burn!

LOL my kids have dont that to the drips of paint on the utility room floor!

Andymic · 13-06-2010, 22:14

What do I do?
Well, if I'm honest, as little as possible, but then I am getting on a bit.
I'm in I.T. but my role is not 'hands on' so tinkering with cars lets me get my hands dirty. That and tending my allotment!!

13-06-2010, 11:53	#1
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	Identify Year of Manufacture? Hope this isn't off topic. Is there any way I can identify the exact model and year of manufature of my Mistral R20? It's not a UK vehicle and the details off the chassis plate are: Y-R20 R20-402846 B08775 CK7 K TVPURPAR20TDA Thanks in advance Andy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13-06-2010, 15:21	#3
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	Right oh. Sticker has gone although there is a nice shiny label shaped residue there. Was manufacture 3/94 so I'll take a guess the car is a 94 or 95 Andy

13-06-2010, 15:55	#4
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	id say 94. not going to have bits hanging about to long.

13-06-2010, 21:21	#5
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	OK, got the log book tonight but it is in Greek. Says first registered 1/10/95 and manufacured 1/1/95 (I think!!) so I guess it was made during 1994. A good start...... Now I need to get a few parts to get everything working properly and get rid of the radio/cassette for a radio/cd player. Thanks for the 'heads up'

13-06-2010, 21:36	#6
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	http://www.eurocarparts.com/ecp/p/Ca.../Service-Parts what bits you after??? where in london are you. I used to live north west area, close to Barnet.

13-06-2010, 21:41	#7
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	Zippy Not much really, I need some new washer nozzles, offside rear lens (cracked) and some bulbs for the instrument panel. I live in Harrow, so not a million miles from Barnet, although I'm in Cyprus at the moment (quick break). Andy

13-06-2010, 21:48	#8
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	have a search for a member cncfab. he has a few bits most of the time. darwin for bulbs / leds.. ive not been in barner for over 20 years.. ( yes IAM that old ) so is it raining in Cyprus then?

13-06-2010, 21:55	#9
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	Well, We had thunder and lightning on Thursday but it was great on Friday and all weekend. I'm back on Tuesday so I won't see the Mistral again until August. Still, it gives me plenty of time to get the bits together and something to do whilst the wife is sunbathing when we come back. Do you know if there is a radio/cd palyer that will connect straight into the existing loom without me having to 'hack' the connectors? Barnet is still a great place. The students at Barnet college have made a big thing of painting patterns on all the chewing gum stuck to the pavement. I'm up there reasonably often as my accountants are on Wood Street. Andy

13-06-2010, 22:03	#10
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	ooh right, so what do you do then?? swoping radio / cd player is simple. even I did it!! so got to be. need the right ISO lead for the car make and model. ebay or halfords if you got cash to burn! LOL my kids have dont that to the drips of paint on the utility room floor!

13-06-2010, 22:14	#11
Andymic Junior Member Join Date: Jun 2010 Location: Greater London Vehicle: Mistral 2.7TD Posts: 12	What do I do? Well, if I'm honest, as little as possible, but then I am getting on a bit. I'm in I.T. but my role is not 'hands on' so tinkering with cars lets me get my hands dirty. That and tending my allotment!!