Where do you park yours.....

The Patrolman · 22-09-2019, 21:00

New parking spot for the Troll.
Just lurking in the woods

Banshee · 22-09-2019, 21:05

Quote:

Originally Posted by The Patrolman

New parking spot for the Troll.
Just lurking in the woods

It was a pleasure to camp in there for the night mate!!! I'd happily return and would deffo give a good review on trip advisor!!!!

Jay666d · 26-09-2019, 20:54

On the drive... For now.

terranosaurusdoug · 27-09-2019, 20:22

Quote:

Originally Posted by The Patrolman

New parking spot for the Troll.
Just lurking in the woods

crime scene photo "the Redcar boys shooting"

I was in Redcar t'other month, went to amusements etc. Was better than Whitby!

terranosaurusdoug · 27-09-2019, 20:22

Quote:

Originally Posted by Jay666d

On the drive... For now.

Thats so cute

The Patrolman · 12-10-2019, 18:56

So we had 20t of road planings delivered.
It does make getting on the drive interesting....

AdrianC · 18-10-2019, 16:43

Quote:

Originally Posted by The Patrolman

So we had 20t of road planings delivered.
It does make getting on the drive interesting....

Quarantined Patrol , approach with caution

The Patrolman · 23-10-2019, 22:00

All nicely levelled out now, just waiting for the next 20t.
Gate posts are in, a couple of railway sleepers should hold the gates up nicely.
Just need to make the gates and find some bargain gate motors on ebay.
Oh.. n the Trolls got a fresh MOT too.

macabethiel · 24-10-2019, 06:49

Quote:

Originally Posted by The Patrolman

All nicely levelled out now, just waiting for the next 20t.
Gate posts are in, a couple of railway sleepers should hold the gates up nicely.
Just need to make the gates and find some bargain gate motors on ebay.
Oh.. n the Trolls got a fresh MOT too.

TBH as always you get what you pay for we have Frog motors with Came controllers. Ours are below ground motors we have had them for some 6 years. Even when they are flooded and the water has frozen they still work!! I think they are 24 volt motors.

The Frog motors are well sealed from water ingress - after our fire due to the corrosive debris that was left in the sump type casing they started to play up. Fortunately the Insurance paid for new pair. The gate contractors chucked the old motors.

I have seen lots of the above ground arm driven type arrangements cause no end of trouble to owners. When I drove for MB a lot of the owners lived in high end properties having Fort Knox Gates etc. Frog Motors seems to be well rated in the trade.

If you get a power cut there is a simple key so you can disengage the drive. You can get a lock insert to restrict access to the drive disengagement arrangement but like locking wheel nuts they are in my view not worth the bother. If someone want to get in they can climb over or ram them!

Jay666d · 24-10-2019, 21:00

I decided to go with a cantilever style gate so that it slides to the side without any need for it to run in a track.

I wanted it to slide rather than swing because after a decent snow, they would struggle to open. I opted for the cantilever rather than a track for the same reason, also it would probably fill up with dirt & leaves!

One motor does all the work, with a little cog running on some toothed track. (It has a little toggle to tell the motor to start and stop when it has reached it's fully open/closed positions)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

24-10-2019, 21:00	#10
Jay666d Senior Member Join Date: Jul 2016 Location: Northumberland Vehicle: Patrol GU3 (Y61) 3.0 SVE Posts: 1,375	I decided to go with a cantilever style gate so that it slides to the side without any need for it to run in a track. I wanted it to slide rather than swing because after a decent snow, they would struggle to open. I opted for the cantilever rather than a track for the same reason, also it would probably fill up with dirt & leaves! One motor does all the work, with a little cog running on some toothed track. (It has a little toggle to tell the motor to start and stop when it has reached it's fully open/closed positions)