|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
04-01-2019, 12:06 | #1 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Am I Expecting Too Much
I’m not too sure if I’m expecting too much or am I just moaning for the sake of it, what do you guys think.
My wife bought me a Coffee Maker for Christmas, unpacked it amd set it up yesterday. I won’t mention brand as that could lead to all kinds of problems. Anyway read the instructions and they said remove all the moveable parts and wash with warm soapy water and then run it through a coffee making cycle with plain water and no coffee. No problem followed the instructions to the letter but decided I would run water through a couple of times. After second cycle there was still a plastic smell and the water was tainted with a plastic taste. So ran water through a total of 6 times yesterday and same taint. Looked on the internet and found reviews and low and behold bingo loads of poor reviews complaining of the plastic taint. So this morning after all the machine had dried out I washed all the removable parts and again ran plain water through but still the same taint and smell, the whole machine smells of this plastic smell. It’s not a burning smell it’s a new plastic electrical appliance smell that I’ve smelled before from new appliances like TVs and things. So my wife has contacted the manufacturer who is a well known brand not a budget type brand. They have advised her to run the descale programme and use white vinegar through both the cleaning programme and also a coffee making cycle as before without the coffee and then run plain water through a cycle. Now am I expecting too much of a appliance that I should have to go through all that malarkey of deep cleaning and using vinegar when it is brand new straight out of the box. Totally get wash and run a plain water cycle through a couple times but having to deep clean and use vinegar. So am I a Victor Meldrew or is the manufacturer taking the weewee? |
04-01-2019, 12:16 | #2 |
Senior Member
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,416
|
If you have the packaging - return it as not fit for purpose.
I empathise with your problem it should not need to have such cleaning cycles when it is brand new.
White Vinegar might just change the smell from coffee to vinegar. I suspect it is the solvents / plasticisers causing the smell, a well made product should not do this in my opinion. That said your first Coffee might replace the plastic pong with a Coffee aroma. |
04-01-2019, 12:28 | #3 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Not even tried coffee in it.
To be honest given my current health circumstances I don’t want me or my family ingesting what basically must be some kind of gases or vapours from plastic. My opinion is that it isn’t fit for purpose as your title suggests and yes only unpacked yesterday so packaging is close at hand. |
04-01-2019, 12:54 | #4 |
Moderator
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
|
I had one for Xmas too and got the same funny smell from mine when I ran the cleaning cycle a few times, I just put it down to new plastic getting a bit warm
It's gone now though, mines a Russel Hobbs
__________________
Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! |
04-01-2019, 15:02 | #5 | |
Senior Member
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,416
|
Coffee Machines
Quote:
We have a Coffee Machine in our loft that was a leaving present when Wendy left a previous job but as I am the only Coffee drinker found the cleaning just too much bother. And finally I drink it out of a Stainless Steel Cup or Mug only, for me the texture of a metal container adds something. I also only drink wine out of a Pewter Goblet - not glass generally. A bit said really eh ? |
|
04-01-2019, 20:15 | #6 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Now the manufacturer has advised my wife to use a product called oust to clean it with. Needless to say reluctantly it’s now boxed up ready to go back to the shop tomorrow.
|
04-01-2019, 20:19 | #7 |
Senior Member
Join Date: Aug 2018
Location: Middlesex
Vehicle: '97 Terrano II 2.4 Xtreme
Posts: 368
|
That is terrible customer service, they should send you the Oust if that is the solution to their problem.
|
04-01-2019, 21:13 | #8 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
The problems we have with commercial grade machines are enough, I know several people that in the past have tried domestic versions, but none stood the test of time, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
05-01-2019, 14:59 | #9 |
Senior Member
Join Date: Mar 2014
Location: Welcome to Norwich, a fine city
Vehicle: 2004 Terrano 3.0 SVE Auto
Posts: 3,601
|
I've had a Krupps coffee pod machine for years and I remember that having a plasticy smell for the first few times. OK after that and has been faultless since. I de-scale it with their recommended cleaner only when the water flow starts to slow down.
I'm ok..... still completely normal |
Thread Tools | |
Display Modes | |
|
|