Hi I,ve Purchased 98 SWB Maverick 2.7 TD

GHDirect · 18-04-2017, 10:20

Hi all.
Needed an old school technology vehicle to take dog out and occasionally pull large 2 ton trailer. Found a low mileage 1998 SWB Maverick 2.7 TD long MoT fairly rust free which fitted the bill. My (GSD long coat) loves it and so far what bits it required (oil change, discs pads and shockers) have been acceptable and easily fitted. I have some issues with central locking and obtaining the right programming sequence for the 2 button oval key fobs for my actual vehicle. Shall I put a new thread up on the electrics section asking for advice from members
Regards
GH

jims-terrano · 18-04-2017, 10:26

Hi and welcome aboard, loads of advice and experience on here. Take a look at the downloads section in quick links, there lots of how to guides and one just happens to be remote fob programming.

Probably better off creating a thread for each problem.

Blocky10 · 18-04-2017, 10:27

Hello and welcome. Yes, start another thread in the relevant section and ask away.
Years of experience on this site with these trucks so someone should be along with answers soon.
A picture or two of your truck is a must too.

solarman216 · 18-04-2017, 21:31

Hi and welcome, have a look in the downloads there is a full write-up on key fob programming "quick Links- workshop downloads" Rick

emjaybee · 18-04-2017, 21:50

Welcome aboard.

Lots to see, lots of help available.

18-04-2017, 10:20	#1
GHDirect Member Join Date: Mar 2017 Location: Dorset Vehicle: Ford Maverick 2.7TD Posts: 71	Hi I,ve Purchased 98 SWB Maverick 2.7 TD Hi all. Needed an old school technology vehicle to take dog out and occasionally pull large 2 ton trailer. Found a low mileage 1998 SWB Maverick 2.7 TD long MoT fairly rust free which fitted the bill. My (GSD long coat) loves it and so far what bits it required (oil change, discs pads and shockers) have been acceptable and easily fitted. I have some issues with central locking and obtaining the right programming sequence for the 2 button oval key fobs for my actual vehicle. Shall I put a new thread up on the electrics section asking for advice from members Regards GH

18-04-2017, 21:31	#4
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Hi and welcome, have a look in the downloads there is a full write-up on key fob programming "quick Links- workshop downloads" Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18-04-2017, 10:26	#2
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Hi and welcome aboard, loads of advice and experience on here. Take a look at the downloads section in quick links, there lots of how to guides and one just happens to be remote fob programming. Probably better off creating a thread for each problem.

18-04-2017, 10:27	#3
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Hello and welcome. Yes, start another thread in the relevant section and ask away. Years of experience on this site with these trucks so someone should be along with answers soon. A picture or two of your truck is a must too.

18-04-2017, 21:50	#5
emjaybee Senior Member Join Date: Jul 2014 Location: Oxfordshire Vehicle: 3.0Di SVE '05 5 door. Posts: 1,536	Welcome aboard. Lots to see, lots of help available.