CB Wanted - Page 2

Paff · 19-07-2014, 22:57

Quote:

Originally Posted by bry

The old dv 27.Was a good twig when i used the old am am cb's

What about this setup? Except in chrome or black not green.

http://www.ebay.co.uk/itm/Small-Spri...item2c80cccb97

bry · 19-07-2014, 23:01

Tbh,i don't bother much with CB radio these days.Too many muppets on it.They have boots on and just sit on ch 19 all day long.

briggie · 19-07-2014, 23:08

http://www.ebay.co.uk/itm/Sirio-DV27...item1e70d48867

Paff · 19-07-2014, 23:20

Quote:

Originally Posted by briggie

http://www.ebay.co.uk/itm/Sirio-DV27...item1e70d48867

That's a weird looking critter... I don't want to drill holes in the roof so need the CB antenna to be bracket mounted like my VHF/UHF antenna

MicraShed · 19-07-2014, 23:55

Its easy to fabricate an aerial mount to fit to the rear spare wheel carrier then you could use a DV27 (the coil is at the top on these so will peek over your roof) - piece of 13 or 14 SWG steel bent to 90 degrees with two holes drilled - one for the aerial base mount and one for the top mounting bolt of the spare wheel holder.

Be warned, though the DV is a good twig it isnt robust and wont handle a lot of power so if its going to get clobbered go for a whip with the coil at the base but the coil should be roof height really.

Mark charlesworth · 20-07-2014, 09:03

image.jpg
Hand held - 2mt
Top radio - 70cm,2mt,6mt and 10mt
Bottom radio CB 27mhz uk and eu

Paff · 20-07-2014, 13:23

Quote:

Originally Posted by Mark charlesworth

Attachment 5891
Hand held - 2mt
Top radio - 70cm,2mt,6mt and 10mt
Bottom radio CB 27mhz uk and eu

I assume that the top rig is self tapped via a bracket to the centre console and is the other rig in the cubby hole near the auto stick just wedged in or did you rip out the centre console? How is the handie fixed to the 4x4 stick?

What make/model is the CB?

briggie · 20-07-2014, 13:58

Quote:

Originally Posted by Paff

I assume that the top rig is self tapped via a bracket to the centre console and is the other rig in the cubby hole near the auto stick just wedged in or did you rip out the centre console? How is the handie fixed to the 4x4 stick?

What make/model is the CB?

cb looks like this one ....

http://www.rigpix.com/cbfreeband/moonraker_fa5000.htm

Mark charlesworth · 20-07-2014, 16:29

The hand held is not fixed as it needs to come out when I'm out on response the bottom CB has a bracket screwed to the top of cubby hole which is all still in place and the top quad band radio is just the face the main part of the radio is screwed to the back side panel hope this helps you out the antennas will go up on the roof bars on the old mirror mount what the truckers used and yes it is the cobra

jims-terrano · 20-07-2014, 16:42

Think it was Paff started a thread about radio last week or so. I posted photos of mine with the mirror mounts, youll need to fit longer bolts tho, thats all.

Mark charlesworth · 20-07-2014, 17:41

Exhaust u bolt and a straight bit ally or stainless and mount antenna on that

Paff · 20-07-2014, 18:30

I think I posted the link where I got the longer bolts from. If not it's here - http://www.ebay.co.uk/itm/1909994108...84.m1439.l2649

I've cr@pped out CB wise, thought I'd kept my old Cybernet 3000, sadly after having the house upside down, I can't find it, must have been told to have a 'clear out' by the wife and I got rid of it

So Fez_uk, what have you got? I'd like something slim to fit in the cubby hole or fit somewhere on a panel or rear console somewhere.

20-07-2014, 09:03	#21
Mark charlesworth Senior Member Join Date: Jun 2014 Location: England Vehicle: Nissan terrano Posts: 124	image.jpg Hand held - 2mt Top radio - 70cm,2mt,6mt and 10mt Bottom radio CB 27mhz uk and eu Last edited by Mark charlesworth; 20-07-2014 at 09:07. Reason: Text added

20-07-2014, 16:29	#24
Mark charlesworth Senior Member Join Date: Jun 2014 Location: England Vehicle: Nissan terrano Posts: 124	The hand held is not fixed as it needs to come out when I'm out on response the bottom CB has a bracket screwed to the top of cubby hole which is all still in place and the top quad band radio is just the face the main part of the radio is screwed to the back side panel hope this helps you out the antennas will go up on the roof bars on the old mirror mount what the truckers used and yes it is the cobra Last edited by Mark charlesworth; 20-07-2014 at 16:35. Reason: Added text

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19-07-2014, 23:01	#17
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	Tbh,i don't bother much with CB radio these days.Too many muppets on it.They have boots on and just sit on ch 19 all day long.

19-07-2014, 23:08	#18
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	http://www.ebay.co.uk/itm/Sirio-DV27...item1e70d48867

19-07-2014, 23:55	#20
MicraShed Member Join Date: May 2014 Location: Lancashire Vehicle: Maverick SWB 2.7TD Posts: 92	Its easy to fabricate an aerial mount to fit to the rear spare wheel carrier then you could use a DV27 (the coil is at the top on these so will peek over your roof) - piece of 13 or 14 SWG steel bent to 90 degrees with two holes drilled - one for the aerial base mount and one for the top mounting bolt of the spare wheel holder. Be warned, though the DV is a good twig it isnt robust and wont handle a lot of power so if its going to get clobbered go for a whip with the coil at the base but the coil should be roof height really.

20-07-2014, 16:42	#25
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Think it was Paff started a thread about radio last week or so. I posted photos of mine with the mirror mounts, youll need to fit longer bolts tho, thats all.

20-07-2014, 17:41	#26
Mark charlesworth Senior Member Join Date: Jun 2014 Location: England Vehicle: Nissan terrano Posts: 124	Exhaust u bolt and a straight bit ally or stainless and mount antenna on that

20-07-2014, 18:30	#27
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	I think I posted the link where I got the longer bolts from. If not it's here - http://www.ebay.co.uk/itm/1909994108...84.m1439.l2649 I've cr@pped out CB wise, thought I'd kept my old Cybernet 3000, sadly after having the house upside down, I can't find it, must have been told to have a 'clear out' by the wife and I got rid of it So Fez_uk, what have you got? I'd like something slim to fit in the cubby hole or fit somewhere on a panel or rear console somewhere.