Terranosuarus - Modified X plate SWB mk3 TDi for sale, project

[Terranosaurus]

Known to a number on here my truck (the one in my avatar) is for sale and I am open to offers for a quick sale.

It's currently situated just south of Selby and will need trailering away. I just don't have the time to do anything with it, that and I have moved away and its on the drive of my old house and needs to be gone

There's some details and pics here - http://www.nissan4x4ownersclub.com/f...ead.php?t=3485

Some spec

Registered March 2001 - one of the very last on the pre emissions banding tax rates (I bought it for that reason)

Mk3 SWB 2.7 TDi - No MOT, no Tax (SORN), done about 90k I think

Suspension - +2" suspension lift (the springs I used to sell - not just LWB springs which are too hard for a SWB) with Rough country shocks, front shocks are brand new zero miles, rears are +2" and have done no more than 2000 miles. Brand new zero miles front drop links. Steering idler brace.

Engine Bay
Set up for twin Battery but only one currently fitted.
K&N replacement filter

Tyres - four 31 x 10.5 x 15" Maxxis Buckshot Mudders done less than 2000 miles and no chunks missing from offroading etc, spare is a colway 31 x 10.50 mud tyre

Wheels - 4 split rim style Mitsubishi (L400 IIRC) alloys - these do need refurbishing but no problem for an offroader. Spare is an eight spoke "weller" style steel. (the wheels and tyres in pic in link above are not the ones on it now)

Brakes - Brand new zero miles rear brake shoes

Towbar - proper plated tow bar with electrics located on the bodywork below the nearside rear light cluster so the tow bar can easily be removed when not needed

Interior - 3 x 12" fluorescent lights, various elasticated nets for storage

Boot - racked out with plywood (for lightness) shelving for secure stowage of equipment

Electrics - there is a very comprehensive auxiliary loom fed fro the secondary battery so you can leave any of the auxiliaries on without flattening the battery. This was done by me (I used to build high end historic rally car looms from scratch and still make an occasional one) and is to a very high standard not your usual 4x4 wiring, the wiring is set up for the following.

• 4 bumper mounted spot lights
• 4 roof rack ounted spot lights
• 2 rear facing rack mounted reverse/work lights
• 1 rack mounted amber "beacon"
• CB and Amateur radios
• Various extra 12v circuits including, map light, LED touch screen etc
• Std front driving lights rewired to a switch to work as spot lights (ie dip with main beam)
• Theres probably more but its a while since I used it and tbh I can't remember

Radios touchscreen etc not included in sale.

Everything is switched, relayed and fused separated with a dedicated fuse box high up out of the way under the bonnet (will find some pics).

Roof rack - alloy roof rack sat on thule cross bars on custom fitted roof rails. The roof rails go all the way to the front of the truck unlike std Nissan ones. The rack has 4 rectangular (2 spot, 2 drive) at the front and 2 bosch driving lights at the rear In the middle it has a second spare wheel carrier fitted.

Bad Points - the EML light is on and it is down on power but will still out run a Landy 200 or 300TDi but can no longer cut it with a TD5. Those that have been out with me (if any are left here) will be able to confirm this was a quick and well handling truck on the road and was equally at home off road. I've flashed the codes and it needs a No 1 injector as the lift needle sensor in it was failed. It has been stood for a couple of years so is somewhat grubby inside and out, and the centre console needs refitting (removed to remove radios etc). It has the usual rust on the rear panel below the door.

Other than that to the very best of my knowledge everything else is mechanically just as it should be.


Spares - I have a collection of various parts for it including

• The standard shocks I took off to fit rough country
• A complete rear differential
• Aircon pump (was going to use it as a compressor to fit on board)
• Set of 4 rear suspension link bars
• Steering bar, idler and I think the track rods too
• There will be more, if it sells for a sensible price will throw in everything I have

I am open to offers and want it gone quick, will sell with or without the roof rack and lights, and could provide another set of wheels for transport (frontera alloys with road tyres, 16" IIRC) if someone didn't want the wheels and tyres on it. I WILL NOT BREAK it beyond that I am too far away from where it is at the moment otherwise I would be MOTing it cleaning up and selling it like that.

[AlexD333]

Awesome. Someone is bound to snap this up!!!

Are you getting another?

[Banshee]

Just seen the other thread that you linked too and really like those nets, I've been after a few myself, can your guy still source them?

[Terranosaurus]

Originally Posted by AlexD333

Are you getting another?

Not right now, am after a Quattro tdi

Originally Posted by Banshee

Just seen the other thread that you linked too and really like those nets, I've been after a few myself, can your guy still source them?

IIRC the two in the front are from a coach company I used to deal with, the two in the rear roof are motorcycle cargo nets, place I got them from have now closed but available on ebay, branded Oxford, I removed the metal hooks and used black P clips to hold them using special rivets for soft materials into the head lining. I forget the proper name but like these load spreading ones on eBay, item No 380807216613

[Terranosaurus]

Ooops X plate not Y plate, could a mod please edit.

[jims-terrano]

Nice motor I remember that thread well, you put a lot of work into that motor. Hope it fetches a decent price.

[Banshee]

Originally Posted by Terranosaurus

Ooops X plate not Y plate, could a mod please edit.

Changed as requested

[Bigbunny2007]

With no mot or tax and needing number one injector coming with the muds and lights n all that what you looking for? Cash waiting and can collect before end of week. Thanks Craig.


Sent from my RM-892_eu_euro1_249 using Tapatalk

[Terranosaurus]

As with everyone I'm looking for the best I can get for it. I figure it's worth at least £150 if I just weigh it in at the yard down the road but the wheels and tyres would get me another £250 on eBay and the rack and lights at the very least another £100 plus about the same on the suspension and the auxiliary loom I'd keep too to canabalise for other projects (I'd have charged about £800 for it if done for someone else). But as I say open to offers - 16" fronty wheels can go with it too if wanted

[Bigbunny2007]

£500 for the lot then i maybe able to collect today with cash if not tomorrow. Thanks craig


Sent from my RM-892_eu_euro1_249 using Tapatalk

[Banshee]

Originally Posted by Bigbunny2007

£500 for the lot then i maybe able to collect today with cash if not tomorrow. Thanks craig


Sent from my RM-892_eu_euro1_249 using Tapatalk

You'd be lucky to get a Fiesta for that lol

[makeitfit]

Originally Posted by Banshee

You'd be lucky to get a Fiesta for that lol

Just sold MK2 Fiesta for 500 squid

[Banshee]

Originally Posted by makeitfit

Just sold MK2 Fiesta for 500 squid

Was it fancy or just a bog standard?

[makeitfit]

Originally Posted by Banshee

Was it fancy or just a bog standard?

Bog standard except for some old skool wellers

[Bigbunny2007]

Get your big wallet out then banshee!! You was supposed to be sending me a couple of quid for a clutch pedal bush!! They guy wants a no nonsense deal quick. Ive put my offer in and id be there picking it up with the monies. It needs to be trailered away as it has not mot no tax and has been stood for two years so that needs to be a real consideration.


Sent from my RM-892_eu_euro1_249 using Tapatalk