light rails comin on..... - Page 2

Lazy-Ferret · 12-12-2013, 21:51

Quote:

Originally Posted by exosteve

sorry fgot pic

It is correct, but to be safe, I would wire them in pairs, and run 3 pairs of wires down, the potential volt drop on that, with all those connections is very high.

exosteve · 12-12-2013, 21:59

know what your saying. I will try before I fit

Sweety · 13-12-2013, 02:38

That's how I wired mine IIRC only had 4 on the roof & 2 on the bumper but the 20a cable I used for the roof never got hot even after being on an hour but what rustic has said about doubling the ampage of the cable is right & safer. It'll be like day light with them on

comming back from Scotland one night no moon & really bad weather a guy went to over take me, I switched the spots off & he just froze along side me before hitting the breaks & pulling back in behind me as he could see the road better (twisty) & stopped theire for the next 30 miles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-12-2013, 21:59	#17
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	know what your saying. I will try before I fit

13-12-2013, 02:38	#18
Sweety Senior Member Join Date: May 2013 Location: Northumberland Vehicle: Terrano 2.7TDI SE LWB Posts: 3,604	That's how I wired mine IIRC only had 4 on the roof & 2 on the bumper but the 20a cable I used for the roof never got hot even after being on an hour but what rustic has said about doubling the ampage of the cable is right & safer. It'll be like day light with them on comming back from Scotland one night no moon & really bad weather a guy went to over take me, I switched the spots off & he just froze along side me before hitting the breaks & pulling back in behind me as he could see the road better (twisty) & stopped theire for the next 30 miles