spot lights - Page 2

Thomas-the-Terrano2 · 03-09-2013, 22:35

hows about this one?

http://www.ebay.co.uk/itm/DISCOVERY-...item232efde0c5

or this super smashing, flippin expensive

http://www.ebay.co.uk/itm/Spot-Lamp-...item2a135f4a02

mentions nissan vans and shoguns

exosteve · 03-09-2013, 22:57

yuk! to both.
first one has the same lamp design as the ones im looking at but ewww!...
second one is massifff....
The small 6 led lights are only 2 cm in height. which would keep them snug on the lip of the hood.

macabethiel · 04-09-2013, 01:29

Quote:

Originally Posted by exosteve

anyone know the legalitys with screwing lights to my bonnet?
my mate rekons it might be an mot issue?
steve

It might be treated as a Mascot they have to be sprung mounted or fitted with a shear off facility to prevent / reduce pedestrian injury.

zippy656 · 04-09-2013, 06:17

Also i think will look better if lights are round.

trophymick · 04-09-2013, 10:31

Quote:

Originally Posted by zippy656

Also i think will look better if lights are round.

These.

http://www.ebay.co.uk/itm/BIG-POWERF...item27d78343e1

exosteve · 04-09-2013, 21:01

ewww!!!
round ones on the roof ok.
low profile for fog lights.
it would be nice to have them so there not even visable until there switched on.
I was thinking a strip across the top of the bonnet with 2 cm high lights with a fabricated housing to loog like a bonnet protector.

Thomas-the-Terrano2 · 05-09-2013, 21:27

was looking at how many and size of holes in bumper for fitting lamps in,

then are within line of truck less likely to damage or be damaged. when you
look at how trolls gained fogs in bumpers think from 2004/5 potential there
too if prepared to cut bumper.

with those on bonnet atleast will know where front edge of truck is for parking
certainly when had big truck style 9"s on old t2 there was no doubt as were
visible even though mounted on top of bumper.

exosteve · 05-09-2013, 21:36

I don't want to fix anything to the bumpers ans there going to get knocked about a bit and as soon as funds allow it will be removed for a winch bumber

bry · 05-09-2013, 23:06

Noticed you have a 2001 truck.Same as mine,apart from mine being swb.And i have to say my lights are spot on(no pun)So i assume its for cosmetics that you want extra lights(Truck looks better).
Or have you got some issues,with your bog standard lights. And if so what are they.?
Just curious is all.

03-09-2013, 22:35	#16
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	hows about this one? http://www.ebay.co.uk/itm/DISCOVERY-...item232efde0c5 or this super smashing, flippin expensive http://www.ebay.co.uk/itm/Spot-Lamp-...item2a135f4a02 mentions nissan vans and shoguns __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

05-09-2013, 21:27	#22
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	was looking at how many and size of holes in bumper for fitting lamps in, then are within line of truck less likely to damage or be damaged. when you look at how trolls gained fogs in bumpers think from 2004/5 potential there too if prepared to cut bumper. with those on bonnet atleast will know where front edge of truck is for parking certainly when had big truck style 9"s on old t2 there was no doubt as were visible even though mounted on top of bumper. __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-09-2013, 22:57	#17
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	yuk! to both. first one has the same lamp design as the ones im looking at but ewww!... second one is massifff.... The small 6 led lights are only 2 cm in height. which would keep them snug on the lip of the hood.

04-09-2013, 06:17	#19
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	Also i think will look better if lights are round.

04-09-2013, 21:01	#21
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	ewww!!! round ones on the roof ok. low profile for fog lights. it would be nice to have them so there not even visable until there switched on. I was thinking a strip across the top of the bonnet with 2 cm high lights with a fabricated housing to loog like a bonnet protector.

05-09-2013, 21:36	#23
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	I don't want to fix anything to the bumpers ans there going to get knocked about a bit and as soon as funds allow it will be removed for a winch bumber

05-09-2013, 23:06	#24
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	Noticed you have a 2001 truck.Same as mine,apart from mine being swb.And i have to say my lights are spot on(no pun)So i assume its for cosmetics that you want extra lights(Truck looks better). Or have you got some issues,with your bog standard lights. And if so what are they.? Just curious is all.