All other jobs.

[bry]

Are on hold,I know have to replace the n/s side step.It sort of came adrift.Happened this weekend on the pay n play day.Hey Ho.

[judd750]

did you get stuck ?

[Barrbeast]

Better a side step than your sill!

Both my side steps took a bit of a battering on the Wales trip but better them than the alternative The near side one has a couple of places where the rubber on the side has been peeled back by a rock or two and the front of the offside step is bent upward but not noticeably to a casual observer (I can still hear the thud when it happened!)

Plan is to replace them with box section rock sliders eventually but they'll do the job in the meantime, next job is a 2" lift so they shouldn't catch as much once I get that done.

Anyways... as judd750 says, did you get stuck?

[bry]

Originally Posted by Barrbeast

Better a side step than your sill!

Both my side steps took a bit of a battering on the Wales trip but better them than the alternative The near side one has a couple of places where the rubber on the side has been peeled back by a rock or two and the front of the offside step is bent upward but not noticeably to a casual observer (I can still hear the thud when it happened!)

Plan is to replace them with box section rock sliders eventually but they'll do the job in the meantime, next job is a 2" lift so they shouldn't catch as much once I get that done.

Anyways... as judd750 says, did you get stuck?

Yeah i got beached.If ya dont get stuck ya not trying

[96terrano]

I turned my side steps into rock sliders

[bry]

Clutch Master Cylinder.As soon as i can get one.Is now the number one priority.

[Barrbeast]

Originally Posted by bry

Yeah i got beached.If ya dont get stuck ya not trying

Haha Good lad

[bry]

Originally Posted by Barrbeast

Better a side step than your sill!

Both my side steps took a bit of a battering on the Wales trip but better them than the alternative The near side one has a couple of places where the rubber on the side has been peeled back by a rock or two and the front of the offside step is bent upward but not noticeably to a casual observer (I can still hear the thud when it happened!)

Plan is to replace them with box section rock sliders eventually but they'll do the job in the meantime, next job is a 2" lift so they shouldn't catch as much once I get that done.

Anyways... as judd750 says, did you get stuck?

Also its only money.And my lad say's i have loads