Number1 (No1) Injector needed

shadowbroker · 28-05-2013, 23:02

Hello, Does anyone have a working No1 diesel injector available for sale?

I have the Zexel setup on a 2.7TDi 1999 auto

thank you in advance.

clivvy · 28-05-2013, 23:04

I sold one recently to makeitfit, might be worth sending him a pm? Otherwise you're looking at over £130 new.

frosty · 28-05-2013, 23:20

The one I am breaking is the hitachi system is that the one your wanting?

shadowbroker · 29-05-2013, 10:28

Quote:

Originally Posted by frosty

The one I am breaking is the hitachi system is that the one your wanting?

yes i think so.

i have a Hitachi MAF with Zexel ECU/Pump

other problem i have is that, i think someone has applied what i think is a liquid type of PTFE so i will need to maybe add a little heat or something to get it off.

clivvy · 30-05-2013, 13:06

Quote:

Originally Posted by shadowbroker

yes i think so.

i have a Hitachi MAF with Zexel ECU/Pump

other problem i have is that, i think someone has applied what i think is a liquid type of PTFE so i will need to maybe add a little heat or something to get it off.

you will need a special socket to remove the injector (or just remove it in stages) but youll need a special socket to fit the new one anyway! I had to make my own by using a standard injector socket, and chopping off the right amount to allow the sensor and wire through, I have a document somewhere if you would like it, but makeitfit has my old injector and socket. Be really careful though, I needed a sturdy extension bar to get mine out and the modified socket isn't as strong-be careful!

bonesXU1 · 30-05-2013, 19:55

Be careful when you remove it, worth doing when the engine is hot, mine was that tight it cracked a Snapon injector socket. I managed to get it out and new one fitted before I noticed the socket had snapped.

clivvy · 30-05-2013, 20:01

yup, as above. I had to use a really long and heavy extension bar and lean into it pushing as I went to crack it loose....

shadowbroker · 31-05-2013, 00:48

Sounds like a right royal pain in the ass... Nice sunny day sort of a job.

28-05-2013, 23:02	#1
shadowbroker Senior Member Join Date: Nov 2012 Location: north west Vehicle: Nissan Terrano 3.0 Posts: 192	Number1 (No1) Injector needed Hello, Does anyone have a working No1 diesel injector available for sale? I have the Zexel setup on a 2.7TDi 1999 auto thank you in advance.

28-05-2013, 23:20	#3
frosty Senior Member Join Date: Oct 2012 Location: Yorkshire Vehicle: 98 Ford Maverick 2.7 tdi Posts: 204	Injecter The one I am breaking is the hitachi system is that the one your wanting?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

28-05-2013, 23:04	#2
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	I sold one recently to makeitfit, might be worth sending him a pm? Otherwise you're looking at over £130 new.

30-05-2013, 19:55	#6
bonesXU1 Senior Member Join Date: Sep 2011 Location: I.O.M Vehicle: Terrano 2 Posts: 212	Be careful when you remove it, worth doing when the engine is hot, mine was that tight it cracked a Snapon injector socket. I managed to get it out and new one fitted before I noticed the socket had snapped.

30-05-2013, 20:01	#7
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	yup, as above. I had to use a really long and heavy extension bar and lean into it pushing as I went to crack it loose....

31-05-2013, 00:48	#8
shadowbroker Senior Member Join Date: Nov 2012 Location: north west Vehicle: Nissan Terrano 3.0 Posts: 192	Sounds like a right royal pain in the ass... Nice sunny day sort of a job.