DC motor speed controller wanted - Page 2

96terrano · 09-11-2012, 23:41

It's not really going to have a use, I just like building weird things

, I'm still looking for a lawnmower engine to hookup and make a propper 14v gennerator

briggie · 09-11-2012, 23:43

Quote:

Originally Posted by solarman216

strange one this!! you have a 12 v battery to drive a 14.4 volt drill that will drive a T2 alternator with slipping belts, and you want a controller to limit the slip, and just what are you going to do with the alternator output? charge the battery running the drill? perpetual motion comes to mind, Rick

we think alike rick

solarman216 · 09-11-2012, 23:45

OK playing is learning, I will go with that, it's how I did it, if you find some thing you do not understand pull it to bits, and if it was not destroyed in the process rebuild it, great stuff, Rick

96terrano · 09-11-2012, 23:48

Quote:

Originally Posted by solarman216

if you find some thing you do not understand pull it to bits, and if it was not destroyed in the process rebuild it, great stuff, Rick

yup, that's what I do all the time, great fun

briggie · 09-11-2012, 23:54

thats how i learnt electronics , by pulling old tv's and radios to bits , and getting a fair few belts from the final anode too

, oh what fun

sometimes they still worked when i rebuilt them too

96terrano · 10-11-2012, 00:00

Quote:

Originally Posted by briggie

thats how i learnt electronics , by pulling old tv's and radios to bits , and getting a fair few belts from the final anode too

, oh what fun

sometimes they still worked when i rebuilt them too

I've had a few burns off the flybacks out of tvs

09-11-2012, 23:41	#16
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	It's not really going to have a use, I just like building weird things, I'm still looking for a lawnmower engine to hookup and make a propper 14v gennerator

09-11-2012, 23:45	#18
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	OK playing is learning, I will go with that, it's how I did it, if you find some thing you do not understand pull it to bits, and if it was not destroyed in the process rebuild it, great stuff, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-11-2012, 23:54	#20
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	thats how i learnt electronics , by pulling old tv's and radios to bits , and getting a fair few belts from the final anode too , oh what fun sometimes they still worked when i rebuilt them too