Quote:
Originally Posted by rustic
Second instalment might be tonight if I can't sleep again, I am on pond cleaning duty today, the smaller pond has lost around 2' around the edge caused by shrubs, weeds, and the odd tree sapling, the only way to reach it, is to run a ladder across the centre, which just happens to take a couple of spare decking boards side by side, the ladder is clamped to the decking around the pond on one edge, so it shouldn't tilt, it takes all my weight so far... will start the clearance once the sun drops a bit.
If there's a splash, I'm sure you will hear about it lol... 
Rustic |
Snap I have an old wooden ladder that I leave over my small pond with two planks of decking in the middle !
Do you remember the S.P.Q.R. Mini tappet adjusting tool ? It had a ratchet attached to a screw driver tip with a socket on it. A small chart told you how many clicks you needed to give 12 thousands of an inch adjustment. It was better than feeler gauges as it allowed for wear of the rocker etc.
16-08-2016, 00:27
Threaded Mode