All Done

Terrano Steve · 22-06-2016, 20:48

Shot blasted my chassis as it had light surface rust all over. Then it was a couple coats of primer followed by 2 coats of black paint. Then plastered it with Dinitrol using a spray gun supplied with it, the gun came with a length of hose which can be slid down the inside of chassis & jets outward.
I was really pleased with the result I had to remove the front propshaft this morning and it is still really good after almost 2 years.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

22-06-2016, 20:48	#28
Terrano Steve Senior Member Join Date: Oct 2014 Location: South west Vehicle: Terrano Posts: 522	Shot blasted my chassis as it had light surface rust all over. Then it was a couple coats of primer followed by 2 coats of black paint. Then plastered it with Dinitrol using a spray gun supplied with it, the gun came with a length of hose which can be slid down the inside of chassis & jets outward. I was really pleased with the result I had to remove the front propshaft this morning and it is still really good after almost 2 years.