manual pump conversion on late t2

Timbo_1975 · 17-02-2016, 14:43

Guys, I've done several mech pump conversions on the TD27, Bosch and Zexel, as have afew others.

I'm not going into the gritty detail of the conversion on here again, PM if you want to know.

ECU and sensors all stay in place, everything works except the ECU doesn't actually control a pump.

Speedo signal comes direct from the gearbox. Don't start butchering wiring, you don't need to.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

17-02-2016, 14:43	#35
Timbo_1975 Senior Member Join Date: Apr 2008 Location: S Shropshire Vehicle: Inbetween Terrano's ! Posts: 967	Guys, I've done several mech pump conversions on the TD27, Bosch and Zexel, as have afew others. I'm not going into the gritty detail of the conversion on here again, PM if you want to know. ECU and sensors all stay in place, everything works except the ECU doesn't actually control a pump. Speedo signal comes direct from the gearbox. Don't start butchering wiring, you don't need to.