Slindon opening 29th

solarman216 · 20-03-2021, 21:03

Yes as said Slindon Safari is opening on Monday 29th March I and my mates will be there, I expect it to be a very busy day, anyone else coming? Rick

solarman216 · 28-03-2021, 23:16

Silly me thought it was a bank Holliday, but it is not so going anyway, but not sure what sort of turnout it will be as many will be working, let you all know tomorrow, Rick

makeitfit · 28-03-2021, 23:42

Go for it Rick 😊

solarman216 · 29-03-2021, 20:02

Yep did that Pete, had a good day, lots there but not overcrowded, this was us 20 after arriving

solarman216 · 29-03-2021, 20:05

As no trees around put 5 pins in this and it pulled us out a treat

solarman216 · 29-03-2021, 20:08

Until we hit this, so put the other 5 in and it stayed solid, but the Dyneema suffered, it was already old and full of Slindon grit so later in the day it gave out

solarman216 · 29-03-2021, 20:13

We helped this guy out as he had burnt his clutch, we winched 3 more out in different places but after getting stuck in a place we been through before but again the fairlead was buried in muddy water and that was when the cable gave in, had a spare and got out but we were all in by then, Rick

makeitfit · 30-03-2021, 08:30

I've washed my dynema many times in the washing machine . The trick is to get the bugger out before her indoors gets home ��

solarman216 · 30-03-2021, 19:54

I had thought of that but do not think I would get away with it, Slindon mud gets everywhere and is easily recognized, anyway only lifted the bonnet today and this is what I found

solarman216 · 30-03-2021, 20:00

As you see the rad is pretty clogged, fashioned a length of copper pipe, sealed the end and drilled a 5mm hole so now have a lance with the water jet at right angle to the pipe so easy matter, after removing the fan shroud to wash it all away, also able to push it between the air con rad to jet it from the front as well and can easily see when clean water is passing through, Rick

elty001 · 31-03-2021, 06:29

Looks like a good day was had by all Rick

I might treat myself to local run on a few lanes this weekend.

solarman216 · 02-04-2021, 22:33

Well, washed my old rope and cut out the bad bit and spliced it together again, although a fair bit shorter (about 24 mtrs) it still functions, and tested out OK, also have a new 36 mtr length but it is only 8mm so not really ideal, have just bought a 26 mtr bit of 10mm from a site that buys end of real off cuts for £43 delivered, but most of what they have is what I call "sheathed" rope designed I guess for the sailing brigade so kinder on the hands, but not very good on a winch drum (thanks Pete for the info on that) the other downside is a 10mm rope is now 12mm including the outer covering so will struggle to fit on the drum anyway, am now a bit gutted as the first day out at Piccadilly wood is Sunday 4th but we got an Easter party for the family on that day, when I mentioned going, if looks could kill I would be dead, ah well hopefully there will be plenty more unless the powers that be decide to lock us down again and I would not rule it out as it really is a control issue, Rick

makeitfit · 05-04-2021, 09:27

Hey Rick, hope you mustered a smile yesterday 😀
Going back to your rad cleaning lance.
Years ago I made an old fire extinguisher into a pressure washer. Took it with me on pay n play days just to hose off the rad while the mud was still wet.
Basically inserted a schreader valve in the head. Fill two thirds full of tap water and pressurise with tyre inflator. The good thing about it was not being too aggressive on the fins.

solarman216 · 05-04-2021, 11:15

Quote:

Originally Posted by makeitfit

Hey Rick, hope you mustered a smile yesterday 😀

Yes Pete had all the grand kids round for an Easter egg hunt, we had trampoline and a couple of go kart thingies, so much fun was had by all.

I like your fire extinguisher idea, might just do one of those, Rick

20-03-2021, 21:03	#1
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Slindon opening 29th Yes as said Slindon Safari is opening on Monday 29th March I and my mates will be there, I expect it to be a very busy day, anyone else coming? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. Last edited by solarman216; 22-03-2021 at 22:34. Reason: spelling

28-03-2021, 23:16	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Silly me thought it was a bank Holliday, but it is not so going anyway, but not sure what sort of turnout it will be as many will be working, let you all know tomorrow, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

02-04-2021, 22:33	#12
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Well, washed my old rope and cut out the bad bit and spliced it together again, although a fair bit shorter (about 24 mtrs) it still functions, and tested out OK, also have a new 36 mtr length but it is only 8mm so not really ideal, have just bought a 26 mtr bit of 10mm from a site that buys end of real off cuts for £43 delivered, but most of what they have is what I call "sheathed" rope designed I guess for the sailing brigade so kinder on the hands, but not very good on a winch drum (thanks Pete for the info on that) the other downside is a 10mm rope is now 12mm including the outer covering so will struggle to fit on the drum anyway, am now a bit gutted as the first day out at Piccadilly wood is Sunday 4th but we got an Easter party for the family on that day, when I mentioned going, if looks could kill I would be dead, ah well hopefully there will be plenty more unless the powers that be decide to lock us down again and I would not rule it out as it really is a control issue, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

28-03-2021, 23:42	#3
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Go for it Rick 😊

30-03-2021, 08:30	#8
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	I've washed my dynema many times in the washing machine . The trick is to get the bugger out before her indoors gets home ��

31-03-2021, 06:29	#11
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	Looks like a good day was had by all Rick I might treat myself to local run on a few lanes this weekend.

05-04-2021, 09:27	#13
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Hey Rick, hope you mustered a smile yesterday 😀 Going back to your rad cleaning lance. Years ago I made an old fire extinguisher into a pressure washer. Took it with me on pay n play days just to hose off the rad while the mud was still wet. Basically inserted a schreader valve in the head. Fill two thirds full of tap water and pressurise with tyre inflator. The good thing about it was not being too aggressive on the fins.