|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
06-12-2016, 18:27 | #1 |
Senior Member
Join Date: Nov 2016
Location: South Yorkshire
Vehicle: Nissan terrano 2
Posts: 115
|
Losing power
Hi I'm back went out this morning terrano had hardly any power in 1st and 2nd gear was ok when I eventually got into 3rd.went back out this afternoon and it ran fine any ideas I'm struggling to keep my partner away from the garage I got it from.thanks annette
|
06-12-2016, 19:30 | #2 |
Senior Member
Join Date: Apr 2016
Location: Nr J28 M1
Vehicle: 03 Terrano 2.7 TDi
Posts: 995
|
Odd one Annette.
Did the revs increase, but the speed stay the same? |
06-12-2016, 19:40 | #3 |
Senior Member
Join Date: Nov 2016
Location: South Yorkshire
Vehicle: Nissan terrano 2
Posts: 115
|
No revs.machanics just been out again lol.he said it's dropping into something but can't remember what he said something to do with 4x4.he said nearly everything is brand new in the engine bay which I could see when he showed me.I no what a turbo is nowbut he's taking it Saturday for a good look over
|
06-12-2016, 19:57 | #4 |
Senior Member
Join Date: Sep 2010
Location: Mid-Wales
Vehicle: Maverick 2.7 - Patrol 4.2
Posts: 5,645
|
How would he know everything is new??
|
06-12-2016, 20:11 | #5 |
Senior Member
Join Date: Nov 2016
Location: South Yorkshire
Vehicle: Nissan terrano 2
Posts: 115
|
He just said it's had some money spent on it.showed me the turbo after he took pipe off it and said that was new.radiator he said was brand new.all the pipes are new could see that myself as all the jubilee clips are brand new:he did say something about needing a new intercooler .I've got a limit on how much I want to spend on it before I say no more.but he's reassured me these engines run forever if looked after.
|
06-12-2016, 20:12 | #6 |
Senior Member
Join Date: Apr 2016
Location: Nr J28 M1
Vehicle: 03 Terrano 2.7 TDi
Posts: 995
|
I should ask............... Is it manual or auto?
|
06-12-2016, 20:13 | #7 | |
Senior Member
Join Date: Apr 2016
Location: Nr J28 M1
Vehicle: 03 Terrano 2.7 TDi
Posts: 995
|
Quote:
|
|
06-12-2016, 20:51 | #8 | |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Quote:
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
06-12-2016, 21:48 | #9 |
Senior Member
Join Date: Nov 2016
Location: South Yorkshire
Vehicle: Nissan terrano 2
Posts: 115
|
Manual.it's had me in tears today but apparently I'm worrying about nothing. I love the car and won't give up with it
|
06-12-2016, 23:58 | #10 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Is yours Bosch or Zexel pumped? cos I have a Zexel head if you need one, the way to tell is look at the Maf on the intake to the turbo, if it is Bosch then I cannot help, if it is Hitachi then my head will fit, I have tried drilling out glow plugs, problem is the metal is hard so ordinary drills will not work, specialist companies may well have kit to deal with it but will not be cheap, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
07-12-2016, 09:38 | #11 | |
Moderator
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
|
Quote:
Your mechanic sounds like a wise guy and certainly sounds like he's had some experience of these motors before and he's exactly right, these engine are largely bulletproof and since joining here in 2012 I've only known 2 people blow them up and 1 of those is still going and suspected to just be a "venting" issue Can you be more specific with what it's doing?
__________________
Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! |
|
07-12-2016, 10:21 | #12 |
Senior Member
Join Date: Dec 2012
Location: clacton on sea essex
Vehicle: nissan terrano 2 2.7 tdi
Posts: 1,638
|
surly if its sucking air in intercooler it will be under powered,make sure both rubber pipes in and out of inter are tight.if its hole in inter repair or replace.as pipes get warmed up leaks can close.also mini filter on ip can block on derv.
|
07-12-2016, 10:33 | #13 |
Senior Member
Join Date: Sep 2014
Location: Belgium
Vehicle: Terrano II 2.7TDi SWB '97
Posts: 802
|
And if it is a Hitachi MAF, it can be cleaned - worked wonders when mine went into limp mode.
|
07-12-2016, 10:45 | #14 |
Senior Member
Join Date: Nov 2016
Location: South Yorkshire
Vehicle: Nissan terrano 2
Posts: 115
|
The revometer stays the same.yes foot fully down in first and second hardly any power no smoke from exhaust. When I get it into 3rd it's fine.don't know if it's bosch or the other one
|
07-12-2016, 12:06 | #15 | |
Moderator
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
|
Quote:
Specifically, get some close up pictures of the large cylindrical black canister with the large pipe coming off it on the left hand side, this is found in the front right of the engine bay. Secondly, smack bang in the centre of the engine bay you'll have the large silver intercooler, this looks like a horizontal radiator if you will and underneath it on both the left and right hand side will be 2 rubber hoses held onto the intercooler with either large spring clips or jubilee clips, get some close up snaps of those. From what you have described so far it either sounds to me like you have a dodgy MAF (Mass Air Flow) sensor or as stated above, you may be sucking in air from the rubber hoses to the intercooler and losing power that way. There are two types of MAF's, a Bosch variety and a Hitachi variety, it's widely accepted that the Bosch should be left well alone as if you try to clean it you will damage it, I know from first hand experience that YOU WILL kill it if you try and clean it, the Hitachi on the other hand can be cleaned to great effect using silicone free electrical contact cleaner, I brought mine from Maplins, there is a guide how to do this yourself requiring no more tools than what you'd have lying around in the kitchen drawer at home, you won't be able to access that part of the site yet though as you've not become a full member by paying the £10 per year subscription. We'll see you straight, do not be dismayed or upset any longer, I'm sure you will be sorted in no time and will end up a long standing member.
__________________
Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! |
|
|
|