front exhaust flexi

clivvy · 30-03-2014, 11:53

So...yesterday I changed my front exhaust flexi. I decided to do it the man-way and not remove any cross members etc. Man, that inner bolt couldn't be more awkward if it tried. Essentially the job took me far too long, but I kinda enjoyed it as it was a good workout for my arms. I jacked the car up, removed the wheels and inner arch liner and access the bolts through there for two, and from underneath for the awkward bolt.

Once removed, removed the two bolts from the centre section - nice and easy, then wiggled and swore the pipe out from underneath. Did the reverse to fit the new one, awkward as hell without removing the cross members but I wasn't about to risk broken bolts there, a good tap with The Persuader and it was in place easy enough.

Dashing of exhaust gasket paste, tighten up and voila, all done. Most pleased with myself.

larson · 30-03-2014, 14:02

its nice when it all goes to plan

bry · 30-03-2014, 17:01

Quote:

Originally Posted by clivvy

So...yesterday I changed my front exhaust flexi. I decided to do it the man-way and not remove any cross members etc. Man, that inner bolt couldn't be more awkward if it tried. Essentially the job took me far too long, but I kinda enjoyed it as it was a good workout for my arms. I jacked the car up, removed the wheels and inner arch liner and access the bolts through there for two, and from underneath for the awkward bolt.

Once removed, removed the two bolts from the centre section - nice and easy, then wiggled and swore the pipe out from underneath. Did the reverse to fit the new one, awkward as hell without removing the cross members but I wasn't about to risk broken bolts there, a good tap with The Persuader and it was in place easy enough.

Dashing of exhaust gasket paste, tighten up and voila, all done. Most pleased with myself.

Hope you used axle stands,or blocks.Nice to have good weather at the weekends for this type of work.

Saved yourself some money

clivvy · 30-03-2014, 17:38

Quote:

Originally Posted by bry

Hope you used axle stands,or blocks.Nice to have good weather at the weekends for this type of work.

Saved yourself some money

yup, im not daft! used two sets of axel stands - I don't mess about when under a car.

30-03-2014, 11:53	#1
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	front exhaust flexi So...yesterday I changed my front exhaust flexi. I decided to do it the man-way and not remove any cross members etc. Man, that inner bolt couldn't be more awkward if it tried. Essentially the job took me far too long, but I kinda enjoyed it as it was a good workout for my arms. I jacked the car up, removed the wheels and inner arch liner and access the bolts through there for two, and from underneath for the awkward bolt. Once removed, removed the two bolts from the centre section - nice and easy, then wiggled and swore the pipe out from underneath. Did the reverse to fit the new one, awkward as hell without removing the cross members but I wasn't about to risk broken bolts there, a good tap with The Persuader and it was in place easy enough. Dashing of exhaust gasket paste, tighten up and voila, all done. Most pleased with myself.

30-03-2014, 14:02	#2
larson Senior Member Join Date: Jun 2009 Location: moomin vally Posts: 1,138	its nice when it all goes to plan