Clunk

[jims-terrano]

No need for a grease gun for this job, just a plain tub of grease and a plastic bag. Get a helper to standby. turn steering to full lock, it's easier to get at the leading edge lock stop and trailing edge of opposite side. Remove lid, place bag on hand, place said hand covered in bag into the grease and scoop nice small blob on fingers. Then smear over the lock stops on opposing sides. Now ask your helper to turn wheels to opposite lock and start all over again.

Job done, regrease when you hear the noise. Mine need it once or twice a year thats all.

[rustic]

Originally Posted by Jon Campbell-Harris

Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

You don't need a grease gun for the steering stops, a finger full will do.

Don't put grease on the bump stops, they are a rubber type compound.

If you haven't got a grease gun, you will need one to grease the UJ's on the prop shafts anyway.

best regards,
Rustic

[laurieash]

Originally Posted by Jon Campbell-Harris

Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

Dont buy a grease gun just use your finger blob on

[Terranical]

Originally Posted by briggie

puis-je s'il vous plaît un peu de graisse pour graisser ma bosse s'arrête sur mon terrano?

I'm impressed monsieur!

[stinka]

Just put up with the noise tbh

I greased mine once, about a week later the water had washed the grease off

[JCH]

Mercy buckets!!!!!!!!!!

[clivvy]

i greased mine once about three year ago, hasnt clunked since

[JCH]

Finally,do I grease it all round or the tip only.

[zippy656]

http://www.nissan4x4ownersclub.com/f...&pictureid=166 here how i get mine sorted

[clivvy]

Originally Posted by Jon Campbell-Harris

Finally,do I grease it all round or the tip only.

pal, dollop it on the end-it will appear obvious when you look as it will be worn, but i just gave it a nice dollop and its been fine ever since. I just used good old fashioned multipurpose grease.

[JCH]

Thanks everyone.will grease up and report back

[zippy656]

Originally Posted by Jon Campbell-Harris

Thanks everyone.will grease up and report back

Be good idea to do the bump stops while your at it

[rustic]

Originally Posted by clivvy

i greased mine once about three year ago, hasnt clunked since

Did you ever get a new battery for your hearing aid?

[JCH]

Someone above say's not to grease the bump stops,what do you mean

[rustic]

Originally Posted by Jon Campbell-Harris

Someone above say's not to grease the bump stops,what do you mean

Grease on rubber is a no no, as I said before.
Don't know why you would do it.