Clunk

JCH · 01-02-2013, 11:28

My Terrano 2003 purchased three months ago, has an odd clunk when in full lock to the left.No problems if full lock not used, and no problems to right full lock. I can only describe it as a clunking sound.If I do a left turn and do not use the full lock there is not a problem. Any Idea's. Other than that it runs like a dream.
I live in France and have it booked into the local garage next week for investigation.,but They are not Terrano experts.
Normal driving is excellent, the problem is only full lock to the left.

Oh yes an excellent Club, very glad that I joined.
Thanks

clivvy · 01-02-2013, 11:29

well, id be 99% sure its the bump stops. give them all a good dollop of grease and that should fix it.

there are two per wheel.

do that, and cancel your garage appointment.

stinka · 01-02-2013, 11:55

Grease your lock stops

On hub and bottom arm, they are contact points that determine your full lock

JCH · 01-02-2013, 13:07

Can you tell a very non mechanical person where these bump stops are located

JCH · 01-02-2013, 13:29

Are lock stops and bump stops the same thing

theron · 01-02-2013, 13:55

All details here: http://www.nissan4x4ownersclub.com/d...rkshop/wk1.pdf

Just try greasing them first before you think about replacing.

AD Ent · 01-02-2013, 14:02

Turn your wheels out and have a look from the front, you'll spot em. Just look like metal door stops. They grind against each other so thick grease sorts it. Or stop short of full lock like I do.
Mine is like yours, Left grinds Right is fine, for now.

JCH · 01-02-2013, 15:59

Thanks for the inspection info.Have looked and the plastic caps are broken or missing. Will order up new caps, fit and grease and it should solve the problem.until then I will drive at 90% left lock.

Fez_uk · 01-02-2013, 16:19

Just grease them, no need for the caps.

JCH · 01-02-2013, 17:15

If I just grease them will they still rub metal to metal when I am at full lock.
Surely the plastic caps stop that happening , or am I wrong.
These are the lock stops, are the bump stops different.

Fez_uk · 01-02-2013, 17:28

Lock stops, Just stops the noise. It's ok for the metal to rub.

rustic · 01-02-2013, 18:05

Quote:

Originally Posted by Fez_uk

Lock stops, Just stops the noise. It's ok for the metal to rub.

Nice new plastic caps will be great for a year or so, then wear through to the metal anyway, so save some time and money, grease them every 3 months, leave them alone other than that.
The stops are in a " high wash area" ie the grease will always get washed off in the rain.

The suspension is tough enough anyway.
JUST avoid being on full lock when bouncing over rocks and things.
I always go to full lock, then back off a bit, I have never heard mine clunk since following my own advice.

If it ain't broke.... don't fix it.

Terranical · 01-02-2013, 18:33

Quote:

Originally Posted by rustic

Nice new plastic caps will be great for a year or so, then wear through to the metal anyway, so save some time and money, grease them every 3 months, leave them alone other than that.
The stops are in a " high wash area" ie the grease will always get washed off in the rain.

The suspension is tough enough anyway.
JUST avoid being on full lock when bouncing over rocks and things.
I always go to full lock, then back off a bit, I have never heard mine clunk since following my own advice.

If it ain't broke.... don't fix it.

What he said - I grease my steering stops every three months or so, never had a peep out of them in three years.
The bump stops are the big rubber and steel things above the rear axle (think there's some on the front too), they are a limiter to avoid excessive suspension travel.

JCH · 01-02-2013, 18:49

Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

briggie · 01-02-2013, 18:52

puis-je s'il vous plaît un peu de graisse pour graisser ma bosse s'arrête sur mon terrano?

01-02-2013, 11:28	#1
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Clunk My Terrano 2003 purchased three months ago, has an odd clunk when in full lock to the left.No problems if full lock not used, and no problems to right full lock. I can only describe it as a clunking sound.If I do a left turn and do not use the full lock there is not a problem. Any Idea's. Other than that it runs like a dream. I live in France and have it booked into the local garage next week for investigation.,but They are not Terrano experts. Normal driving is excellent, the problem is only full lock to the left. Oh yes an excellent Club, very glad that I joined. Thanks

01-02-2013, 13:07	#4
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Clunk Can you tell a very non mechanical person where these bump stops are located

01-02-2013, 13:29	#5
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Lock stops/bump stops Are lock stops and bump stops the same thing

01-02-2013, 15:59	#8
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Lock stops Thanks for the inspection info.Have looked and the plastic caps are broken or missing. Will order up new caps, fit and grease and it should solve the problem.until then I will drive at 90% left lock.

01-02-2013, 17:15	#10
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Caps If I just grease them will they still rub metal to metal when I am at full lock. Surely the plastic caps stop that happening , or am I wrong. These are the lock stops, are the bump stops different.

01-02-2013, 11:29	#2
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	well, id be 99% sure its the bump stops. give them all a good dollop of grease and that should fix it. there are two per wheel. do that, and cancel your garage appointment.

01-02-2013, 11:55	#3
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Grease your lock stops On hub and bottom arm, they are contact points that determine your full lock

01-02-2013, 13:55	#6
theron Member Join Date: Oct 2008 Location: Midlands Posts: 98	All details here: http://www.nissan4x4ownersclub.com/d...rkshop/wk1.pdf Just try greasing them first before you think about replacing.

01-02-2013, 14:02	#7
AD Ent Senior Member Join Date: Dec 2011 Location: West Yorkshire Vehicle: Terrano II SE+ 2.7 2000 Posts: 915	Turn your wheels out and have a look from the front, you'll spot em. Just look like metal door stops. They grind against each other so thick grease sorts it. Or stop short of full lock like I do. Mine is like yours, Left grinds Right is fine, for now.

01-02-2013, 16:19	#9
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Just grease them, no need for the caps.

01-02-2013, 17:28	#11
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Lock stops, Just stops the noise. It's ok for the metal to rub.

01-02-2013, 18:49	#14
JCH Senior Member Join Date: Jan 2013 Location: France Department 85. Vendee Vehicle: 2003 Nissan Terrano LWB Posts: 128	Grease Off to the shops in the morning to buy a grease gun. Do I grease the bump stops the same. It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

01-02-2013, 18:52	#15
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	puis-je s'il vous plaît un peu de graisse pour graisser ma bosse s'arrête sur mon terrano?