Electric shower cutting out

96terrano · 14-01-2013, 20:46

thought id ask as ive been very pleased with the other non vehicle related questions & answers here

basically, this problem has gone on over a year now, when the counsel fitted new bathrooms back in early 2011 we got new showers too, but in late 2011, it started randomly cutting out, tripping the breaker on the fuse board randomly

some times when you flick the trip switch it would come back on but other times the trip switch just fires off again, we spoke to the counsel and they actually hot glued the switch in the on position

anyways that sorted it, then about 2 months later the counsel came back and replaced the shower and trip switch, but the new shower still trips the switch if you have the temp over a certain setting, it seems to be ok now but will still trip say once every 2 months

any ideas?

laurieash · 14-01-2013, 20:51

Maybe fuse not rated to shower? but a good sparki should know what to do.
If council fitted it get them back

96terrano · 14-01-2013, 20:53

Quote:

Originally Posted by laurieash

Maybe fuse not rated to shower? but a good sparki should know what to do.
If council fitted it get them back

yes, i don't even think the guys who did it were qualified, as it was bodged like with the hot glue

firebobby · 14-01-2013, 20:53

It could be the water flow is to low and when you try to over heat the water, it cuts out, but sounds more like you have an electrical fault.
I wouldn't let those council tossers near my house, glueing the breaker in the on position

96terrano · 14-01-2013, 20:56

Quote:

Originally Posted by firebobby

It could be the water flow is to low and when you try to over heat the water, it cuts out, but sounds more like you have an electrical fault.
I wouldn't let those council tossers near my house, glueing the breaker in the on position

no, problem is this is a council house, so there's nowt we can do, i wouldn't go about gluing breakers, i'd find the fault

makeitfit · 14-01-2013, 20:59

Quote:

Originally Posted by 96terrano

yes, i don't even think the guys who did it were qualified, as it was bodged like with the hot glue

ffs I hope you still got the earth bonding in place . GLUE BREAKER

sue the sods.
They have to be qualified to do operate a glue gun

96terrano · 14-01-2013, 21:06

Quote:

Originally Posted by makeitfit

ffs I hope you still got the earth bonding in place . GLUE BREAKER

sue the sods.
They have to be qualified to do operate a glue gun

yes everything's earthed, no thought for safety

SPARKIEDOO · 14-01-2013, 21:17

WHAT IS THE MAKE OF SHOWER ...RYAN

IS IT THE MCB THAT TRIPS OR THE RCBO ( RCD/MCB COMBIND )

DO YOU HAVE PROBLEMS WITH WATER PRESSURE

briggie · 14-01-2013, 21:21

i disagree totally ..... of course theres something you can do about it , complain , or ask a qualified electrician to provide a report and test of your house electrics ,tell the council you have serious doubts about your safety and your house electrics ..... dont pussyfoot about

solarman216 · 14-01-2013, 21:22

Bit confused here 96 as all the MCB's that I can think of cannot be held in the on position, whilst you can hold the external lever "up" the internals will still trip out, then when the lever is lowered again it clicks onto the internals again so that it can be reset, the only one that could be glued on that I can recall is the early Wylex with two push buttons, (one small to test and one large to reset) I guess the large one could be glued in? Rick

wildbri · 14-01-2013, 21:23

often when people upgrade their electric showers they fit a more powerful one to get more hot water, but then the cable and circuit breaker are the wrong size. You really should get on to yhe council and have it checked ASP tell them this is a safety issue, could cause a fire. Dont forget you pay the rent, or your Pa does.

regards bri

briggie · 14-01-2013, 21:24

it trips for a reason ..... dont ignore it

96terrano · 14-01-2013, 21:37

easier then explaining, house electrics aernt my thing !

IMAG1741_1.jpg

laurieash · 14-01-2013, 21:51

Dont like the look of were they have chopped out the plastic for the new fuses.
the whole consumer unit might not be up to it.
I WOULD NOT LET MY KIDS USE IT. if its tripping.

SPARKIEDOO · 14-01-2013, 21:51

What is the make of the shower !!!!!!!!!!!!

14-01-2013, 20:46	#1
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	Electric shower cutting out thought id ask as ive been very pleased with the other non vehicle related questions & answers here basically, this problem has gone on over a year now, when the counsel fitted new bathrooms back in early 2011 we got new showers too, but in late 2011, it started randomly cutting out, tripping the breaker on the fuse board randomly some times when you flick the trip switch it would come back on but other times the trip switch just fires off again, we spoke to the counsel and they actually hot glued the switch in the on position anyways that sorted it, then about 2 months later the counsel came back and replaced the shower and trip switch, but the new shower still trips the switch if you have the temp over a certain setting, it seems to be ok now but will still trip say once every 2 months any ideas?

14-01-2013, 21:22	#10
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Bit confused here 96 as all the MCB's that I can think of cannot be held in the on position, whilst you can hold the external lever "up" the internals will still trip out, then when the lever is lowered again it clicks onto the internals again so that it can be reset, the only one that could be glued on that I can recall is the early Wylex with two push buttons, (one small to test and one large to reset) I guess the large one could be glued in? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. Last edited by solarman216; 14-01-2013 at 21:23. Reason: spelling

14-01-2013, 20:51	#2
laurieash Senior Member Join Date: Aug 2010 Location: Isle of Axholme nr scunthorpe Vehicle: TerranoII /Discos/Landrov Posts: 423	Maybe fuse not rated to shower? but a good sparki should know what to do. If council fitted it get them back

14-01-2013, 20:53	#4
firebobby Senior Member Join Date: Feb 2012 Location: South Bucks Vehicle: Terrano 3.0 SVE 2005 Posts: 3,499	It could be the water flow is to low and when you try to over heat the water, it cuts out, but sounds more like you have an electrical fault. I wouldn't let those council tossers near my house, glueing the breaker in the on position

14-01-2013, 21:17	#8
SPARKIEDOO Senior Member Join Date: Jul 2011 Location: cupar scotland Vehicle: terrano II SWB 2.7 (2002) Posts: 431	WHAT IS THE MAKE OF SHOWER ...RYAN IS IT THE MCB THAT TRIPS OR THE RCBO ( RCD/MCB COMBIND ) DO YOU HAVE PROBLEMS WITH WATER PRESSURE

14-01-2013, 21:21	#9
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	i disagree totally ..... of course theres something you can do about it , complain , or ask a qualified electrician to provide a report and test of your house electrics ,tell the council you have serious doubts about your safety and your house electrics ..... dont pussyfoot about

14-01-2013, 21:23	#11
wildbri Senior Member Join Date: Feb 2007 Location: south lakeland Vehicle: terrano 1997 tdi Posts: 940	often when people upgrade their electric showers they fit a more powerful one to get more hot water, but then the cable and circuit breaker are the wrong size. You really should get on to yhe council and have it checked ASP tell them this is a safety issue, could cause a fire. Dont forget you pay the rent, or your Pa does. regards bri

14-01-2013, 21:24	#12
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	it trips for a reason ..... dont ignore it

14-01-2013, 21:37	#13
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	easier then explaining, house electrics aernt my thing ! IMAG1741_1.jpg

14-01-2013, 21:51	#14
laurieash Senior Member Join Date: Aug 2010 Location: Isle of Axholme nr scunthorpe Vehicle: TerranoII /Discos/Landrov Posts: 423	Dont like the look of were they have chopped out the plastic for the new fuses. the whole consumer unit might not be up to it. I WOULD NOT LET MY KIDS USE IT. if its tripping.