my 4x4 - Page 2

96terrano · 19-03-2011, 23:32

Quote:

Originally Posted by Thomas-the-Terrano2

so what are your plans for your t2 then?

got some nice bfg ats there already by looks of it.

Thanks. The alloys and tyres (still good tread) were from a scrapyard for £100. Thay came from a 1998 chrome front maverick. I'm wanting to get roof rails for is, like what are on R1cho's 4x4

R1cho · 19-03-2011, 23:35

Quote:

Originally Posted by 96terrano

I'm wanting to get roof rails for is, like what are on R1cho's 4x4

Some other members have done that, from what i remember its a right pain to do

Thomas-the-Terrano2 · 19-03-2011, 23:42

yeah i bought some for my old t2, was a mk2 SR model, in end got troll
so never fitted 'em, ended up selling them onto another member here
based in greece. was some postage but like rocking horse over there...

makeitfit · 20-03-2011, 00:02

Quote:

Originally Posted by R1cho

Some other members have done that, from what i remember its a right pain to do

Get out of town

Roof rails are easy to fit and can be done without moving the headlining if you're posh

R1cho · 20-03-2011, 00:08

Quote:

Originally Posted by makeitfit

Get out of town

Roof rails are easy to fit and can be done without moving the headlining if you're posh

well excuuuuuuuuuuuse me lol

ere u might know this, the washer on my droplink (the bit inside the wish bone) has bent down over the nut so i cant get a socket over it, any ideas on how to get the nut off without just angle grinding the drop link as its a fairly new one. all i want to do is replace the bushes lol

solarman216 · 20-03-2011, 00:09

Quote:

Originally Posted by makeitfit

Get out of town

Roof rails are easy to fit and can be done without moving the headlining if you're posh

What "port out starboard home" got to do with roof rails, Rick

makeitfit · 20-03-2011, 00:16

Ah well as I be from lower decks, I didn't have one of them there fancy rivnut tools, so took the pleb route and bolted the buggers on from inside after pulling out the head lining

Put a good dollop of goo on each bolt and stuck the head lining back in

makeitfit · 20-03-2011, 00:22

Quote:

Originally Posted by R1cho

well excuuuuuuuuuuuse me lol

ere u might know this, the washer on my droplink (the bit inside the wish bone) has bent down over the nut so i cant get a socket over it, any ideas on how to get the nut off without just angle grinding the drop link as its a fairly new one. all i want to do is replace the bushes lol

Hmmm tricky that as there's not much room in that hole is there?

You could try with a long reach socket over the bent washer and hit it hard with a big hammer and hope to flatten it enough to get a grip on the nut.
OR if I was doing it I'd cut the thing off and get another from the scrap yard

I don't have any on mine and binned all the old ones I had. Perhaps Rick or Adz will have one for you

R1cho · 20-03-2011, 00:45

Quote:

Originally Posted by makeitfit

OR if I was doing it I'd cut the thing off and get another from the scrap yard

had that idea myself about 30 seconds after making the post lol, did a search on local scrappys website and they have a mav in so gonna go down tomoz and have a look

96terrano · 20-03-2011, 00:56

Anybody selling roof rails for a lwb. I've got some for a swb. But thay look stupid as there to small

. Ohh yeah. I looked on eBay but there expensive.

Fez_uk · 20-03-2011, 01:11

Ah yes but I bet a nut and washer is alot stronger than a riv nut.

19-03-2011, 23:42	#18
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	yeah i bought some for my old t2, was a mk2 SR model, in end got troll so never fitted 'em, ended up selling them onto another member here based in greece. was some postage but like rocking horse over there... __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

20-03-2011, 00:56	#25
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	Anybody selling roof rails for a lwb. I've got some for a swb. But thay look stupid as there to small. Ohh yeah. I looked on eBay but there expensive.

20-03-2011, 00:16	#22
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Ah well as I be from lower decks, I didn't have one of them there fancy rivnut tools, so took the pleb route and bolted the buggers on from inside after pulling out the head lining Put a good dollop of goo on each bolt and stuck the head lining back in

20-03-2011, 01:11	#26
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Ah yes but I bet a nut and washer is alot stronger than a riv nut.