Hello

ste68blue · 19-01-2011, 22:37

Hi all, only found the site this afternoon and have had a little look around, looks great.

At the beginning of the year i bought a 1999 Terrano 2.7TDi in black.

I have to say it is a great motor, goes well and is well equipped too with tinted windows and leather seats.

I have had a few small issues with it, but i like to get my hands dirty so i don't mind fixing it if i can.

So far i have serviced it, re-indexed the front suspension, taken off the crappy running boards, adjusted the front wheel bearings and a few other bits.

The one thing i have to do yet is replace the front exhaust pipe, it appears to be leaking from the flexi section, i have bought a new pipe at around £40 but i have quick go at it the other day and the 3 nuts that secure it to the manifold end are a little tight and i am afraid i may snap them if i try too hard, they probably need some heat...but i dont have oxy accetaline to hand...

rustic · 19-01-2011, 22:44

Hi and welcome to the site, I know that you can get better access to the exhaust by removing the nearside wheel and inner rubber splash guard, this also allows better access to get to the oil filter.

There are several threads on here regarding the removal of the front section.
best regards, Rustic

zippy656 · 19-01-2011, 22:59

welcome, youll fit right in here

clivvy · 19-01-2011, 23:09

welcome to the club, nice looking Terrano that, i like it!

ste68blue · 19-01-2011, 23:14

Hi guys, thanks for the welcome.

I did remove the rubber section under the wing to get to the oil filter and it does make access to two of the nuts a little easier, i am just a little scared of snapping them....

I am tempted to take the exhaust to my local garage and getting a price..

tezzer · 19-01-2011, 23:19

welcome to the club ste68blue, have you access to a blow lamp? might be enough to loosen the nuts.

R1cho · 19-01-2011, 23:29

welcome to the club, loads of friendly people with great advice on here, if theres room try using a hammer to shock them loose

4x4_Gav · 20-01-2011, 07:43

Welcome mate!

lacroupade · 20-01-2011, 12:15

Nice truck!

Welcome to the asylum which, to quote Pink Floyd, the lunatics have taken over.....

19-01-2011, 22:37	#1
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	Hello Hi all, only found the site this afternoon and have had a little look around, looks great. At the beginning of the year i bought a 1999 Terrano 2.7TDi in black. I have to say it is a great motor, goes well and is well equipped too with tinted windows and leather seats. I have had a few small issues with it, but i like to get my hands dirty so i don't mind fixing it if i can. So far i have serviced it, re-indexed the front suspension, taken off the crappy running boards, adjusted the front wheel bearings and a few other bits. The one thing i have to do yet is replace the front exhaust pipe, it appears to be leaking from the flexi section, i have bought a new pipe at around £40 but i have quick go at it the other day and the 3 nuts that secure it to the manifold end are a little tight and i am afraid i may snap them if i try too hard, they probably need some heat...but i dont have oxy accetaline to hand...

19-01-2011, 22:44	#2
rustic Senior Member Join Date: Feb 2007 Location: Staffordshire Vehicle: Maverick Mk I 2.7 TD LWB Posts: 7,825	Hi and welcome to the site, I know that you can get better access to the exhaust by removing the nearside wheel and inner rubber splash guard, this also allows better access to get to the oil filter. There are several threads on here regarding the removal of the front section. best regards, Rustic __________________ Ford Maverick GLX 1995 2.7TD LWB in illusion silver, 98k miles. Owned since new, for 22 years. Best car I have ever owned. Just wish I could drive it more.

19-01-2011, 22:59	#3
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	welcome, youll fit right in here

19-01-2011, 23:09	#4
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	welcome to the club, nice looking Terrano that, i like it!

19-01-2011, 23:14	#5
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	Hi guys, thanks for the welcome. I did remove the rubber section under the wing to get to the oil filter and it does make access to two of the nuts a little easier, i am just a little scared of snapping them.... I am tempted to take the exhaust to my local garage and getting a price..

19-01-2011, 23:19	#6
tezzer Senior Member Join Date: Nov 2008 Location: basildon essex Vehicle: transit camper van 1987 Posts: 2,829	welcome to the club ste68blue, have you access to a blow lamp? might be enough to loosen the nuts.

19-01-2011, 23:29	#7
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	welcome to the club, loads of friendly people with great advice on here, if theres room try using a hammer to shock them loose

20-01-2011, 07:43	#8
4x4_Gav Senior Member Join Date: Dec 2010 Location: Nottinghamshire Vehicle: Nissan Terrano II 2.7 TDI Posts: 480	Welcome mate!

20-01-2011, 12:15	#9
lacroupade Senior Member Join Date: Jan 2009 Location: All hail to the Glove of Love... Posts: 9,212	Nice truck! Welcome to the asylum which, to quote Pink Floyd, the lunatics have taken over.....