|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
24-10-2007, 16:14 | #1 |
Senior Member
Join Date: Sep 2004
Location: South
Posts: 1,748
|
Performance upgrade units
Something i received today via e-mail for you all to have a look at and make your own minds up.
------------------------------------------------------------ Our company is one of the leading UK tuning companies in the country, we supply numerous off-road clubs with our performance upgrade units so they develop more power and torque in those tricky sections in the woods. Not only do our units give you more power and torque but they also give a better fuel economy normally around a 10% saving. Our units use all OE connectors that are factory dealer quality and are fitted to the vehicle by the customer within a short space of time. We normally attend most of the big land rover shows up and down the country and our range of units keep growing by the month thanks to our extensive research and development up in Scotland. We now cover most diesel applications both 4x4 and daily cars so our range is very extensive indeed. We sell literally hundreds of units but the Nissan units seem very popular. For example if we take the Nissan Navara 174 BHP Version 2006>, you gain an extra 26BHP and also gain an extra 35lb ft of torque, this transforms the Nissan and makes them come alive and act a lot more responsively. Every customer that we have sold one to has been more than impressed with the transformation and we have e-mails on a regular basis commenting on how happy they are now and it’s like they have a new engine under the bonnet. The main reason why we sell so many units is this, firstly they can fitted by the customer within a short space of time, come with full fitting instructions and also use all OE connectors so no need for chopping wires etc. And secondly and the MOST IMPORTANT WE FEEL is that we deliver the power SAFELY, for example all our research and development programs last several months on each vehicle to ensure they run within the manufacturers limits, safely and with no problems. ---------------------------------------------------------------------------- If you are interested then please mention the club when you contact them as we may be able to strike a deal. www.dastek.co.uk Mav. |
24-10-2007, 17:38 | #2 |
Guest
Posts: n/a
|
I have known alot of people use the dastek unichip on petrol cars to increase performance with very good results.
I would be interested to know a price, so I may have to e-mail them. |
24-10-2007, 17:42 | #3 |
Senior Member
Join Date: Sep 2004
Location: South
Posts: 1,748
|
Hello Viking, try for a discount before handing over any money as we can stick together and get a good price as a club if more members are interested.
Mav. |
24-10-2007, 18:50 | #4 |
Senior Member
Join Date: Mar 2006
Posts: 578
|
has anybody else thought of this one I found on good old ebay item No 110173299847 I would be interested on your veiews guys..... and gals
|
24-10-2007, 19:02 | #5 |
Guest
Posts: n/a
|
its that resistor fooling electronics to bung more fuel in by looks of it dont even think they work on oil burners.
when i had mav i contacted www.angeltuning.co.uk but they only do real modern stuff theresa veg/bio diesel review on there aswell |
24-10-2007, 19:13 | #6 |
Senior Member
Join Date: Feb 2005
Location: Teesside,Englandshire, I only sleep there honest.
Vehicle: Nissan Patrol 2.8 TD6 Y61
Posts: 1,420
|
I've got a PSI Powerbox in my T2 and it makes a serious difference 30+bhp.
This sounds similar as it uses manufacturer plugs as there is no wire cutting etc. Funny how he just mentions Navara, what about T2/Mav's, Patrols etc?????? I found that PSI no longer make box's for the 2.7TDI's and 2.8 Patrol engines, but still make them for the 3.0Di engines. :smile:
__________________
(Y61) Patrol 2.8TD6 SE Touring.DPT Box. Ironman Nitro Shocks OME Springs 20mm lift front, 30mm lift rear. 33" General Grabber AT's, Airtec Snorkel, EGR Mod. 2.5" Stainless Exhaust |
25-10-2007, 00:32 | #7 | |
Guest
Posts: n/a
|
Quote:
|
|
25-10-2007, 23:17 | #8 |
Senior Member
Join Date: Sep 2006
Posts: 549
|
more than my motors worth :
|
31-01-2008, 23:23 | #9 |
Guest
Posts: n/a
|
Just found this scanning through the forums and i know a few lads on the RS2000 forums who installed this setup and was a load of over priced twadle with dyno day misery to back it up :wink:
|
02-02-2008, 12:13 | #10 |
Senior Member
Join Date: Mar 2005
Location: Merseyside
Posts: 1,048
|
I've no experience of Dastek, but I know from trackday circles that so long as the set up is done properly, the results can be very good.
|
Thread Tools | |
Display Modes | |
|
|