dipstick needed

jonny · 29-08-2018, 08:52

Hi chaps. Bit of an odd one but I need a dipstick for a 2.7 diesel. I opened the bonnet to check the oil and the top has gone missing

. No idea how that happened.

Cheers

solarman216 · 31-08-2018, 13:30

I have found one, it is the same lenth as my Mrs 98 T2 but does not fit as it is a tad wider, hers has the part number on the yellow plastic handle, the one I have is stamped on the flat shaft 86G06, Rick

jonny · 31-08-2018, 14:41

The yellow handle is the part missing on mine so can't check the number. Do you think it will fit ok.? Worried about pulling it out incase it doesn't go back in right

solarman216 · 31-08-2018, 22:13

if you have the thin one then mine will not fit, the only way to see is remove it, and see if it has numbers on the metal, Rick

29-08-2018, 08:52	#1
jonny Senior Member Join Date: Jan 2018 Location: Cheshire Vehicle: Terrano Posts: 198	dipstick needed Hi chaps. Bit of an odd one but I need a dipstick for a 2.7 diesel. I opened the bonnet to check the oil and the top has gone missing . No idea how that happened. Cheers

31-08-2018, 13:30	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	I have found one, it is the same lenth as my Mrs 98 T2 but does not fit as it is a tad wider, hers has the part number on the yellow plastic handle, the one I have is stamped on the flat shaft 86G06, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

31-08-2018, 22:13	#4
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	if you have the thin one then mine will not fit, the only way to see is remove it, and see if it has numbers on the metal, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

31-08-2018, 14:41	#3
jonny Senior Member Join Date: Jan 2018 Location: Cheshire Vehicle: Terrano Posts: 198	The yellow handle is the part missing on mine so can't check the number. Do you think it will fit ok.? Worried about pulling it out incase it doesn't go back in right