Breaking the Silicone Sealant Bond ? - Page 2

macabethiel · 15-05-2017, 11:18

Thanks for the suggestions & links Guys will give it a try.

macabethiel · 15-05-2017, 15:40

Quote:

Originally Posted by macabethiel

Thanks for the suggestions & links Guys will give it a try.

Well it was hard going for the first couple of tiles then I realised that silicone debris was making the blade jam by sticking to the blade.

Squirted some WD40 on the blade and on the shower frame and the blade just cut through the next two tiles in seconds. Applied more WD 40 and it was all done in under 10 minutes. Have scrapped off the excess residue with loose Stanley Knife Blade. Rubbed down area where shower rail was with some Astonish Oven Paste and a white pan scourer.

Great result, small marks on the white tiles probably from the blade contact removed mainly with the Astonish Paste and as a final finish some Brasso on a dry cloth.

Thanks again for the tips.

solarman216 · 15-05-2017, 21:54

Well done mate, when you have done dozens like me you give it little thought, but realize it can be a bit daunting if not done before, Rick

emjaybee · 15-05-2017, 22:03

See, it's easy when you know how.

15-05-2017, 21:54	#18
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	Well done mate, when you have done dozens like me you give it little thought, but realize it can be a bit daunting if not done before, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15-05-2017, 11:18	#16
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	Thanks for the suggestions & links Guys will give it a try.

15-05-2017, 22:03	#19
emjaybee Senior Member Join Date: Jul 2014 Location: Oxfordshire Vehicle: 3.0Di SVE '05 5 door. Posts: 1,536	See, it's easy when you know how.