I may be back

11redrex · 29-02-2016, 23:29

Hello everyone. Hope you're all doing well. I may be renewing my membership soon as my old Maverick has come up for sale. The clutch is completely shot apparently, but for the price they want I can't let it go to the crusher - it's just too nice.
Not sure yet if I'll be fixing it or breaking it myself, so watch this space - either for lots of clutch related tech questions, or a big for sale ad !

jims-terrano · 29-02-2016, 23:45

Get it back, get joined and get a new clutch and stop messing about. You know you want to

Nice to hear from you again by the way

11redrex · 29-02-2016, 23:57

Hi Jim, nice to be remembered ! Glad to see you're still here. My mate clever trevor has had a look at it and reckons the thrust bearing has gone right through the plate. Not sure how he worked that out without removing anything but he did say the fork was out as far as it would go. That means nothing to me, the only clutch I've ever done was on a C Reg Montego, and I made a right balls up of that.

jims-terrano · 01-03-2016, 00:21

Well if you have to pay a garage to do the clutch a rough figure will be around £300, mine cost that much a few years back. Probably be able to get it done for a bit cheaper. I do know that Solarman says they're a heavy gearbox and from what I remember he finds it easier to remove engine.

Good luck what ever you decide.

11redrex · 01-03-2016, 00:24

Remove the engine

Last time I did that I was breaking an older maverick and it took me 9 hours and at least three different sweary words. I'll have a ring round tomorrow and get a few prices for fitting. And then there's the oil leak.......

jims-terrano · 01-03-2016, 00:44

Where's the oil leak?

solarman216 · 01-03-2016, 02:11

if you want your clutch done, I will do it for 100 pounds you supply the parts, and get the motor to me, cannot be fairer than that, Rick

briggie · 01-03-2016, 07:44

Quote:

Originally Posted by solarman216

if you want your clutch done, I will do it for 100 pounds you supply the parts, and get the motor to me, cannot be fairer than that, Rick

hows that for a good deal ?

jims-terrano · 01-03-2016, 08:35

Solarman, wish the distance between darn sarf n up norf wa a bit less

Brilliant offer is that

panelbeater · 01-03-2016, 09:59

rick is that offer open to other members,are there different clutches or one does all.just to get right kit.

Banshee · 01-03-2016, 10:44

Welcome buddy and nice to hear a reunited with owner again thread

I've often wondered what I'd do in that situation, it will be interesting when you get it back to see if you notice the car still has some of the behavioural traits that it did when you drove it last

11redrex · 01-03-2016, 19:12

Thanks for the offer Rick, if I can find a way to get it to you I'll very likely take you up on that.
I'm still undecided what to do with it. The MOT ran out the day after the clutch went so I don't have much idea what else is wrong with it. Towed it home this afternoon. The steering is a joke, the steering wheel seems to have very little to do with the direction the wheels are going. The brakes are almost non-existent, it's got a bit of rot at the back end of the sills (the inners were welded at the last mot) and the wings have now started to bubble. Such a shame, it was almost rust free when I had it last. The interior is going to need a few hours to get it looking smart again, and then there's the oil leak.....

Better pay me tenner I think. And hello to the rest of you , really glad to see you're all still alive and kicking

jims-terrano · 01-03-2016, 19:36

Nice to see ya back again and as for the truck all it needs is a bit of tlc.

Are you handy with the spanners? If so get it jacked up at front end (and on axle stands) and then take a good look at the steering links, centre drag link and the idler at the passenger side.

Wheres the oil leak?

Probably wont fail test on an oil leak unless it was bad. Then tow it to Ricks for the clutch and you should be able to drive it direct to an mot station if you get some insurance.

briggie · 01-03-2016, 19:43

Quote:

Originally Posted by 11redrex

Thanks for the offer Rick, if I can find a way to get it to you I'll very likely take you up on that.
I'm still undecided what to do with it. The MOT ran out the day after the clutch went so I don't have much idea what else is wrong with it. Towed it home this afternoon. The steering is a joke, the steering wheel seems to have very little to do with the direction the wheels are going. The brakes are almost non-existent, it's got a bit of rot at the back end of the sills (the inners were welded at the last mot) and the wings have now started to bubble. Such a shame, it was almost rust free when I had it last. The interior is going to need a few hours to get it looking smart again, and then there's the oil leak.....

Better pay me tenner I think. And hello to the rest of you , really glad to see you're all still alive and kicking

unfortunately im still here too

11redrex · 01-03-2016, 22:11

Wouldn't be the same without you Briggie,

29-02-2016, 23:29	#1
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	I may be back Hello everyone. Hope you're all doing well. I may be renewing my membership soon as my old Maverick has come up for sale. The clutch is completely shot apparently, but for the price they want I can't let it go to the crusher - it's just too nice. Not sure yet if I'll be fixing it or breaking it myself, so watch this space - either for lots of clutch related tech questions, or a big for sale ad !

01-03-2016, 02:11	#7
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	if you want your clutch done, I will do it for 100 pounds you supply the parts, and get the motor to me, cannot be fairer than that, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

01-03-2016, 10:44	#11
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Welcome buddy and nice to hear a reunited with owner again thread I've often wondered what I'd do in that situation, it will be interesting when you get it back to see if you notice the car still has some of the behavioural traits that it did when you drove it last __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

29-02-2016, 23:45	#2
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Get it back, get joined and get a new clutch and stop messing about. You know you want to Nice to hear from you again by the way

29-02-2016, 23:57	#3
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Hi Jim, nice to be remembered ! Glad to see you're still here. My mate clever trevor has had a look at it and reckons the thrust bearing has gone right through the plate. Not sure how he worked that out without removing anything but he did say the fork was out as far as it would go. That means nothing to me, the only clutch I've ever done was on a C Reg Montego, and I made a right balls up of that.

01-03-2016, 00:21	#4
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Well if you have to pay a garage to do the clutch a rough figure will be around £300, mine cost that much a few years back. Probably be able to get it done for a bit cheaper. I do know that Solarman says they're a heavy gearbox and from what I remember he finds it easier to remove engine. Good luck what ever you decide.

01-03-2016, 00:24	#5
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Remove the engine Last time I did that I was breaking an older maverick and it took me 9 hours and at least three different sweary words. I'll have a ring round tomorrow and get a few prices for fitting. And then there's the oil leak.......

01-03-2016, 00:44	#6
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Where's the oil leak?

01-03-2016, 08:35	#9
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Solarman, wish the distance between darn sarf n up norf wa a bit less Brilliant offer is that

01-03-2016, 09:59	#10
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,638	rick is that offer open to other members,are there different clutches or one does all.just to get right kit.

01-03-2016, 19:12	#12
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Thanks for the offer Rick, if I can find a way to get it to you I'll very likely take you up on that. I'm still undecided what to do with it. The MOT ran out the day after the clutch went so I don't have much idea what else is wrong with it. Towed it home this afternoon. The steering is a joke, the steering wheel seems to have very little to do with the direction the wheels are going. The brakes are almost non-existent, it's got a bit of rot at the back end of the sills (the inners were welded at the last mot) and the wings have now started to bubble. Such a shame, it was almost rust free when I had it last. The interior is going to need a few hours to get it looking smart again, and then there's the oil leak..... Better pay me tenner I think. And hello to the rest of you , really glad to see you're all still alive and kicking

01-03-2016, 19:36	#13
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Nice to see ya back again and as for the truck all it needs is a bit of tlc. Are you handy with the spanners? If so get it jacked up at front end (and on axle stands) and then take a good look at the steering links, centre drag link and the idler at the passenger side. Wheres the oil leak? Probably wont fail test on an oil leak unless it was bad. Then tow it to Ricks for the clutch and you should be able to drive it direct to an mot station if you get some insurance.

01-03-2016, 22:11	#15
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Wouldn't be the same without you Briggie,