Bradbury 2 post car lift 2.5 ton.

Dave_Askham · 25-11-2015, 12:35

Hi Guys,

I thought I would give you guys the chance of buying my ramp before I advertised on the dreaded Ebay.

I have a 3 phase, 2 post Bradbury car ramp in the shed, I got it from a neighbour when he decided he needed more shed room.

I don't have 3 phase, so I thought I would get it installed, I then got a quote..... and nearly fell over....

I thought I would get a converter to make it work, however, like most 'good ideas' it never came to fruition and the ramp is sitting idle. So I've decided that it deserves a new home.

I believe its a 2.5 ton, but will check later, It was in working order when I bought it 18 months ago and I have never used it so I can't see why it wouldn't work.

I gave £550 for it which looking on ebay was about the going rate, as you can imagine I'd like to recover as much as I can so a sensible offer would be considered.

I can assist with loading as I have access to a telehandler, I can also assist with local delivery if required.

I'll post some pictures later when I get a chance to clear a space and take some.

solarman216 · 25-11-2015, 20:09

3 phase is the killer, Rick

rayf3262 · 25-11-2015, 22:22

Quote:

Originally Posted by solarman216

3 phase is the killer, Rick

Although somthing of this order could solve that problem..
http://www.ebay.co.uk/itm/2-2kw-3HP-...MAAOSwBadTpd7O

Some info on the motor rating would be helpful in sizing an inverter drive unit...

solarman216 · 25-11-2015, 22:32

useful info for the potential purchaser Ray, but not for me as have a single phase 3.5 tonne lift already, Rick

rayf3262 · 25-11-2015, 22:52

Quote:

Originally Posted by solarman216

useful info for the potential purchaser Ray, but not for me as have a single phase 3.5 tonne lift already, Rick

They are a very versatile bit of kit, soft start, programmable acceleration, frequency etc... frequently found in passenger lifts in single phase premises.

Pity I don't have space for a vehicle lift at home, I have to make do with the 35 ton lift at work!

Dave_Askham · 26-11-2015, 15:10

Quote:

Originally Posted by solarman216

3 phase is the killer, Rick

Yeah, that's been the show stopper for me to be honest, I have had various conversations with people regarding using an 3 phase converter, or having a single phase motor fitted to the lift, which I must admit sounded like the best option to me.

In all honesty though, I'll very rarely use the lift and I only got it because it was available and sounded like a good idea at the time.

It's just taking up space which could be used for more bikes, well that's my plan anyway !!!

Dave_Askham · 26-11-2015, 15:38

The lift is the same as this one advertised on ebay -

eBay item number:111823932924

25-11-2015, 12:35	#1
Dave_Askham Member Join Date: Oct 2015 Location: North Lincolnshire Vehicle: 05 Terrano 2.7 LWB Posts: 60	Bradbury 2 post car lift 2.5 ton. Hi Guys, I thought I would give you guys the chance of buying my ramp before I advertised on the dreaded Ebay. I have a 3 phase, 2 post Bradbury car ramp in the shed, I got it from a neighbour when he decided he needed more shed room. I don't have 3 phase, so I thought I would get it installed, I then got a quote..... and nearly fell over.... I thought I would get a converter to make it work, however, like most 'good ideas' it never came to fruition and the ramp is sitting idle. So I've decided that it deserves a new home. I believe its a 2.5 ton, but will check later, It was in working order when I bought it 18 months ago and I have never used it so I can't see why it wouldn't work. I gave £550 for it which looking on ebay was about the going rate, as you can imagine I'd like to recover as much as I can so a sensible offer would be considered. I can assist with loading as I have access to a telehandler, I can also assist with local delivery if required. I'll post some pictures later when I get a chance to clear a space and take some.

25-11-2015, 20:09	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	3 phase is the killer, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

25-11-2015, 22:32	#4
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	useful info for the potential purchaser Ray, but not for me as have a single phase 3.5 tonne lift already, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26-11-2015, 15:38	#7
Dave_Askham Member Join Date: Oct 2015 Location: North Lincolnshire Vehicle: 05 Terrano 2.7 LWB Posts: 60	The lift is the same as this one advertised on ebay - eBay item number:111823932924