Wanted Heater fan speed control resistor and the triangular steering wheel boss

Oh Fordy · 08-04-2015, 19:55

Heater fan speed control resistor and the triangular steering wheel boss for a '93 Maverick [posted to UK or Spain].

Thomas-the-Terrano2 · 08-04-2015, 23:02

hi,

try ebay for heater item, paid about £20 for mine.

solarman216 · 08-04-2015, 23:42

Mk 1 square headlight. I have several but no Mk.2. Not sure what you mean by triangular steering wheel boss? Rick

Oh Fordy · 09-04-2015, 19:22

Yes, it's a square headlight Mk1. The blower only runs in position 4 if that makes sense.

I'll get a picture of the horn cover in the morning.
Many Thanks.

firebobby · 09-04-2015, 20:15

Quote:

Originally Posted by Oh Fordy

Yes, it's a square headlight Mk1. The blower only runs in position 4 if that makes sense.

I'll get a picture of the horn cover in the morning.
Many Thanks.

I'm sure you can get the part you need for the blower from a scrapped Nissan Almera in a breakers yard, it's in the downloads section under cheap replacement for heater control.

solarman216 · 09-04-2015, 22:04

Quote:

Originally Posted by Oh Fordy

Yes, it's a square headlight Mk1. The blower only runs in position 4 if that makes sense.

I'll get a picture of the horn cover in the morning.
Many Thanks.

yes that is what happens when the resistors go, wait for pic of cover, I will not be able to do anything anyway till the week end, Rick

Thomas-the-Terrano2 · 09-04-2015, 22:53

workshop for changing heater part here.

http://www.nissan4x4ownersclub.com/d...kshop/wk18.pdf

solarman216 · 09-04-2015, 23:19

Quote:

Originally Posted by Thomas-the-Terrano2

workshop for changing heater part here.

http://www.nissan4x4ownersclub.com/d...kshop/wk18.pdf

that looks like a Mk 2 dropper to me, Mk one I will post a pic tomorrow, Rick

Oh Fordy · 10-04-2015, 19:21

Thanks everyone for your replies, what a great site this is. I didn't describe the horn cover very well so here is a picture plus two of the heater fan regulator.

[URL=http://s964.photobucket.com/user/shedobits/media/DSC03040_zpstrdwoxev.jpg.html]

[/URL

Hope this helps identify whats needed, not too bothered about colour matching the horn part and I can swap a Nissan badge for the Ford.

Thanks in advance everyone.

firebobby · 10-04-2015, 19:58

With heater control, why not go to you local breakers and see if you can get a Nissan Almera one, have you checked the down load section on here

Oh Fordy · 10-04-2015, 20:09

I'll give it a try if all else fails, the local guy is an Anglophobe and will sometimes just say no without even hearing me out.

solarman216 · 10-04-2015, 21:37

I have the fan resistor, pm me if you want one, I only have one Ford and that is my off road motor it has the horn pad but I need it, Rick

Oh Fordy · 11-04-2015, 19:18

EDIT I have the heater jobbie [thanks Solarman] but still looking for the three cornered horn push.

firebobby · 11-04-2015, 20:33

Quote:

Originally Posted by Oh Fordy

EDIT I have the heater jobbie [thanks Solarman] but still looking for the three cornered horn push.

Where did you get the heater thingie from in the end

solarman216 · 11-04-2015, 21:25

Quote:

Originally Posted by firebobby

Where did you get the heater thingie from in the end

Me, Rick

08-04-2015, 19:55	#1
Oh Fordy Junior Member Join Date: Aug 2013 Location: Spain Vehicle: Ford Maverick GLX Posts: 18	Wanted Heater fan speed control resistor and the triangular steering wheel boss Heater fan speed control resistor and the triangular steering wheel boss for a '93 Maverick [posted to UK or Spain].

08-04-2015, 23:02	#2
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	hi, try ebay for heater item, paid about £20 for mine. __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

08-04-2015, 23:42	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	Mk 1 square headlight. I have several but no Mk.2. Not sure what you mean by triangular steering wheel boss? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

09-04-2015, 22:53	#7
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	workshop for changing heater part here. http://www.nissan4x4ownersclub.com/d...kshop/wk18.pdf __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

10-04-2015, 19:21	#9
Oh Fordy Junior Member Join Date: Aug 2013 Location: Spain Vehicle: Ford Maverick GLX Posts: 18	Thanks everyone for your replies, what a great site this is. I didn't describe the horn cover very well so here is a picture plus two of the heater fan regulator. [URL=http://s964.photobucket.com/user/shedobits/media/DSC03040_zpstrdwoxev.jpg.html][/URL Hope this helps identify whats needed, not too bothered about colour matching the horn part and I can swap a Nissan badge for the Ford. Thanks in advance everyone.

09-04-2015, 19:22	#4
Oh Fordy Junior Member Join Date: Aug 2013 Location: Spain Vehicle: Ford Maverick GLX Posts: 18	Yes, it's a square headlight Mk1. The blower only runs in position 4 if that makes sense. I'll get a picture of the horn cover in the morning. Many Thanks.

10-04-2015, 19:58	#10
firebobby Senior Member Join Date: Feb 2012 Location: South Bucks Vehicle: Terrano 3.0 SVE 2005 Posts: 3,499	With heater control, why not go to you local breakers and see if you can get a Nissan Almera one, have you checked the down load section on here

10-04-2015, 20:09	#11
Oh Fordy Junior Member Join Date: Aug 2013 Location: Spain Vehicle: Ford Maverick GLX Posts: 18	I'll give it a try if all else fails, the local guy is an Anglophobe and will sometimes just say no without even hearing me out.

10-04-2015, 21:37	#12
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	I have the fan resistor, pm me if you want one, I only have one Ford and that is my off road motor it has the horn pad but I need it, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

11-04-2015, 19:18	#13
Oh Fordy Junior Member Join Date: Aug 2013 Location: Spain Vehicle: Ford Maverick GLX Posts: 18	EDIT I have the heater jobbie [thanks Solarman] but still looking for the three cornered horn push.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode