Q&A rocker cover

AlexD333 · 02-08-2014, 06:32

Not that I will be, but to do the valves do you need a new gasket or it it liquid gasket?

Lincs Mav · 02-08-2014, 10:05

For the price chuck a new gasket on..

Cheers Gav

Banshee · 02-08-2014, 10:58

Don't bother trying to do them yourself mate I've attempted mine and sure I've made them worse, it seems to be chattering even louder now

I followed the instructions given by everyone but I'm sure I must be doing something wrong, my truck is really starting to get me down again, so many niggles and then that truck hitting me up the arse, I really feel like buying another one and starting over.

I feel like I've made all the mistakes on this one and my next one will be thoroughly cared for

Sorry to hijack the thread a little there Alex

Here's the gasket that you want;
http://www.milneroffroad.com/nissan/...cover-gasket-1

Sweety · 02-08-2014, 13:43

IIRC the gasket is cork like the old mini ones & not that costly but have taken the rocker cover off before & not replaced the gasket just cleaned the surfaces & tightened it back down after doing the tappets & never got a leak

solarman216 · 02-08-2014, 23:36

Gasket is molded rubber as long as it is not hard it will be fine, but most likely it will be the original so best of replacing it, most that I have seen are leaking a little and at 100k plus you cannot blame them, Banshee tappets are a piss to do, how can you get it wrong? Rick

AlexD333 · 03-08-2014, 18:43

Quote:

Originally Posted by Banshee

Don't bother trying to do them yourself mate I've attempted mine and sure I've made them worse, it seems to be chattering even louder now

I followed the instructions given by everyone but I'm sure I must be doing something wrong, my truck is really starting to get me down again, so many niggles and then that truck hitting me up the arse, I really feel like buying another one and starting over.

I feel like I've made all the mistakes on this one and my next one will be thoroughly cared for

Sorry to hijack the thread a little there Alex

Here's the gasket that you want;
http://www.milneroffroad.com/nissan/...cover-gasket-1

Is there no cuddle emot on here

briggie · 03-08-2014, 22:58

AlexD333 · 03-08-2014, 23:41

Quote:

Originally Posted by briggie

That's the daddy, have some of them

02-08-2014, 06:32	#1
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Q&A rocker cover Not that I will be, but to do the valves do you need a new gasket or it it liquid gasket?

02-08-2014, 10:58	#3
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Don't bother trying to do them yourself mate I've attempted mine and sure I've made them worse, it seems to be chattering even louder now I followed the instructions given by everyone but I'm sure I must be doing something wrong, my truck is really starting to get me down again, so many niggles and then that truck hitting me up the arse, I really feel like buying another one and starting over. I feel like I've made all the mistakes on this one and my next one will be thoroughly cared for Sorry to hijack the thread a little there Alex Here's the gasket that you want; http://www.milneroffroad.com/nissan/...cover-gasket-1 __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

02-08-2014, 23:36	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Gasket is molded rubber as long as it is not hard it will be fine, but most likely it will be the original so best of replacing it, most that I have seen are leaking a little and at 100k plus you cannot blame them, Banshee tappets are a piss to do, how can you get it wrong? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-08-2014, 10:05	#2
Lincs Mav Senior Member Join Date: Feb 2013 Location: Lincolnshire Vehicle: Nissan terrano Posts: 405	For the price chuck a new gasket on.. Cheers Gav

02-08-2014, 13:43	#4
Sweety Senior Member Join Date: May 2013 Location: Northumberland Vehicle: Terrano 2.7TDI SE LWB Posts: 3,604	IIRC the gasket is cork like the old mini ones & not that costly but have taken the rocker cover off before & not replaced the gasket just cleaned the surfaces & tightened it back down after doing the tappets & never got a leak

03-08-2014, 22:58	#7
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473