speedo

[dave123]

hi i am looking for a terrano 2 set of clocks . mine looks like this one in the attached photo . the part number off the back is 24810-0X005 . it for a right hand drive 2000 model se 2.7 tdi . if anyone has a set how much would you charge . I have put some pics on here http://www.nissan4x4ownersclub.com/f...ad.php?t=22866

[Paff]

Good luck, I have been looking for a while now...

[dave123]

Originally Posted by Paff

Good luck, I have been looking for a while now...

mine the speedo keeps sticking and the lcd keeps coming and going . I have tried the soldering the dry joints but still the same

[dave123]

Originally Posted by Paff

Good luck, I have been looking for a while now...

I just pm you something that should make you laugh

[Paff]

Originally Posted by dave123

I just pm you something that should make you laugh

And I have PM'd you something that should make you laugh

[dave123]

Originally Posted by Paff

And I have PM'd you something that should make you laugh

how did you sort that out . but that's the same as mine it should say 094357 but yet the 0 keeps change to a 7 . I hope they don't do that to mine . but what did the mot bloke think you went around the world with it and if so that one hell of a engine

[Paff]

My uncle used to own it and had it MOT'd before he sold it to me. He told the MOT guy that it should be 44k odd not 744k, but he told him that he had to put down what he saw at the time of the MOT. I mean 700k in one year FFS!

I bought it and went to see the MOT guy and he was no help. I had to go to my local VOSA MOT center and get one of their MOT guys to verify it was indeed 44k odd miles. Luckily for me my fix held up and to be fair to them I went to see VOSA at 2pm and the next morning I had a fresh MOT cert in the post

Now it is playing up again, sometimes blank, sometimes working OK, then reading 700k more

[Mobieus_uk]

if its any help i had to solder mine up a couple of times, had to do all the pins not just the ones i thought had a dry joint, with regards to the speedo i upgraded the dash lights to i think 2w, then the speedo starting sticking after about 30mins of use with the lights on, ripped it out again and sourced the correct wattage bulbs 1.2w i believe and the problem I created now went away, might be worth checking that you have the right bulbs

[dave123]

inow got a new speedo . well secound hand .but it's a good one all works fine now

[supergnome]

You've got 7 days to change it at the mot station, Happened to me 2 weeks ago. Got a re-issue. but kept the original. David.

[dave123]

Originally Posted by supergnome

You've got 7 days to change it at the mot station, Happened to me 2 weeks ago. Got a re-issue. but kept the original. David.

what do you mean ? . when I ask my garage where I get it moted he said I could get a second hand one and just change it over . because you don't need to see the mileage for a mot

[Paff]

Originally Posted by Mobieus_uk

...had to do all the pins not just the ones i thought had a dry joint...

Do you mean all the joints that are in a line behind the LCD display or others as well?

[Mobieus_uk]

it was all the pins that connected the LCD, lot of them i seem to remember but some looking like they had never seen any solder at all

[dave123]

Originally Posted by supergnome

You've got 7 days to change it at the mot station, Happened to me 2 weeks ago. Got a re-issue. but kept the original. David.

has anyone heard of this after changing the set of clocks over . because the speedo broke