Body lift done :)

Paul h · 21-10-2012, 13:42

Body lift done just waiting for my mate the welder to come along and hive me a hand with bumpers,must admit the lift side of things is straight forward enough.finish it this afternoon then hopefully get snorkel bits sorted in next two week,am I as well taking the air box n filter off and using a mini mushroom filter on the top of the snorkel...any ideas

Big and Daft · 21-10-2012, 14:48

Quote:

Originally Posted by Paul h

...any ideas

Yeah, pictures!

stinka · 21-10-2012, 16:13

Nice one on the lift

Here's snorkle ideas :

That's a cheap enclosed filter, some 76mm tube, 1x 45o and 1x 90o silicon elbow, 1 straight silicon coupler at top on to 76mm 45 bend in aluminium and finally a 76mm snorkel top

Make sure u fit the 20mm drain bung to the under side of new filter that's fitted to UR old filter and trim the hole in outer wing with body gasket from a caravan shop

Bide UR time and look for bargains on eBay and u can do this for around £100

The other option is to use a flexi hose, go up the inner wing out the top up a pillar, I wanted 3inch ducting tho, not sure if 3inch flexi will fit all way up inner wing

ste68blue · 21-10-2012, 19:14

Well done Paul, i look forward to seeing the snorkel so you can test it at the next tong pay and play....

Paul h · 21-10-2012, 21:11

Yep hopefully going to sort it next week done the lift no problem next is some chunky tyres 265 70 15 look small now

ste68blue · 21-10-2012, 21:12

put some 31s on it....they retain the usability without affecting the gearing...

Paul h · 21-10-2012, 21:13

Keep scouring eBay don't want to pay the earth for them

spinna · 21-10-2012, 21:14

and DON'T forget the pic's aswell

ste68blue · 21-10-2012, 21:14

the ones i have were a bargain....£150.00 for the five...remoulds but who cares...they handled tong with ease...

Paul h · 21-10-2012, 21:15

Keep trying to upload them but its not happening will have a word with Steve next time I see him see if he can shed any light

Fez_uk · 21-10-2012, 21:19

photobucket

ste68blue · 21-10-2012, 21:20

Paul if you email them to me i will put them on for you if you want?

Paul h · 21-10-2012, 21:22

Can do do you want to message me your email

stinka · 21-10-2012, 21:25

Quote:

Originally Posted by ste68blue

put some 31s on it....they retain the usability without affecting the gearing...

This, IMHO.

ste68blue · 21-10-2012, 21:37

one side lifted...

and now both sides

21-10-2012, 13:42	#1
Paul h Senior Member Join Date: May 2012 Location: Yorkshire Vehicle: Nissan terrano Posts: 190	Body lift done :) Body lift done just waiting for my mate the welder to come along and hive me a hand with bumpers,must admit the lift side of things is straight forward enough.finish it this afternoon then hopefully get snorkel bits sorted in next two week,am I as well taking the air box n filter off and using a mini mushroom filter on the top of the snorkel...any ideas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-10-2012, 16:13	#3
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Nice one on the lift Here's snorkle ideas : That's a cheap enclosed filter, some 76mm tube, 1x 45o and 1x 90o silicon elbow, 1 straight silicon coupler at top on to 76mm 45 bend in aluminium and finally a 76mm snorkel top Make sure u fit the 20mm drain bung to the under side of new filter that's fitted to UR old filter and trim the hole in outer wing with body gasket from a caravan shop Bide UR time and look for bargains on eBay and u can do this for around £100 The other option is to use a flexi hose, go up the inner wing out the top up a pillar, I wanted 3inch ducting tho, not sure if 3inch flexi will fit all way up inner wing

21-10-2012, 19:14	#4
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	Well done Paul, i look forward to seeing the snorkel so you can test it at the next tong pay and play....

21-10-2012, 21:11	#5
Paul h Senior Member Join Date: May 2012 Location: Yorkshire Vehicle: Nissan terrano Posts: 190	Yep hopefully going to sort it next week done the lift no problem next is some chunky tyres 265 70 15 look small now

21-10-2012, 21:12	#6
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	put some 31s on it....they retain the usability without affecting the gearing...

21-10-2012, 21:13	#7
Paul h Senior Member Join Date: May 2012 Location: Yorkshire Vehicle: Nissan terrano Posts: 190	Keep scouring eBay don't want to pay the earth for them

21-10-2012, 21:14	#8
spinna Senior Member Join Date: Dec 2010 Location: Telford, Shropshire Vehicle: Nissan Patrol y60 4.2d Posts: 1,287	and DON'T forget the pic's aswell

21-10-2012, 21:15	#10
Paul h Senior Member Join Date: May 2012 Location: Yorkshire Vehicle: Nissan terrano Posts: 190	Keep trying to upload them but its not happening will have a word with Steve next time I see him see if he can shed any light

21-10-2012, 21:19	#11
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	photobucket

21-10-2012, 21:20	#12
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	Paul if you email them to me i will put them on for you if you want?

21-10-2012, 21:22	#13
Paul h Senior Member Join Date: May 2012 Location: Yorkshire Vehicle: Nissan terrano Posts: 190	Can do do you want to message me your email

21-10-2012, 21:37	#15
ste68blue Senior Member Join Date: Jan 2011 Location: yorkshire Vehicle: Nissan Terrano 2, 2.7TDi Posts: 664	one side lifted... and now both sides