Got Gas can Weld (Sort of)

Kamsin · 03-05-2012, 11:42

Well i have finally given up on them stupid disposable gas bottles you get at machine mart for welding. They cost about £15 each and last about a day if your lucky due to the fact they leak like hell.
So today i have been to EnyGas and hired a 10kilo gas bottle, Now the hire charge is £46 per year, but a re-fill is only £22. You have to pay the hire charge in advance, but if you take it back after you have finished with it they only charge you for how long you had it. So if i have it 2 month and re fill it once it will have cost me about £53 or less then 4 of them disposables ones. Then i just call and collect a new one next time im welding again.
I really think this is the way forward as i have a fair bit of welding to do coming up.

Fez_uk · 03-05-2012, 13:05

some places let you do a one off deposit for the bottle and charge per refill.

Local place to me is £20 for deposit and £20 per refill.

makeitfit · 03-05-2012, 13:43

What size is that Fez ? The one we got was 50 quid deposit (for as long as you want it) plus refills are about 40

Kamsin · 03-05-2012, 14:05

I thought that was how they would do it round here, but a mate of mine who is a welder saysd most are like this now. There is a guy down in Stoke on Trent that will do it that way but it works out more on fills cos you have to travel over there, about 90 mile round trip.

(RIP) PLANK · 03-05-2012, 14:38

there is a fire extinguisher company near to me and they change the top of an extinguisher to the right valve for a welder and then do carbon dioxide (or other inert gasses they use refills and it's pretty cheap

Fez_uk · 03-05-2012, 15:33

not sure pete, it's about 4ft tall and about 18cm wide.

I am going onto pub co2 gas asap, My current bottle has ran out.

makeitfit · 03-05-2012, 16:04

Top deal Fez, does he do Argon95 ? We've got some stainless to do

Pub gas about 11 quid a bottle

Fez_uk · 03-05-2012, 18:09

It's E&M in aber, Not sure what they do but mine was a co2/argon mix.

Anyway just found the receipt for it and I payed alot more than I remembered.

£50 for deposit and it's £40 a refill

makeitfit · 03-05-2012, 19:27

Ha just what I paid from them too ;-)

03-05-2012, 11:42	#1
Kamsin Senior Member Join Date: Dec 2010 Location: East Midlands Vehicle: Maverick 4x4 2.7 TDI 97 Posts: 1,211	Got Gas can Weld (Sort of) Well i have finally given up on them stupid disposable gas bottles you get at machine mart for welding. They cost about £15 each and last about a day if your lucky due to the fact they leak like hell. So today i have been to EnyGas and hired a 10kilo gas bottle, Now the hire charge is £46 per year, but a re-fill is only £22. You have to pay the hire charge in advance, but if you take it back after you have finished with it they only charge you for how long you had it. So if i have it 2 month and re fill it once it will have cost me about £53 or less then 4 of them disposables ones. Then i just call and collect a new one next time im welding again. I really think this is the way forward as i have a fair bit of welding to do coming up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-05-2012, 13:05	#2
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	some places let you do a one off deposit for the bottle and charge per refill. Local place to me is £20 for deposit and £20 per refill.

03-05-2012, 13:43	#3
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	What size is that Fez ? The one we got was 50 quid deposit (for as long as you want it) plus refills are about 40

03-05-2012, 14:05	#4
Kamsin Senior Member Join Date: Dec 2010 Location: East Midlands Vehicle: Maverick 4x4 2.7 TDI 97 Posts: 1,211	I thought that was how they would do it round here, but a mate of mine who is a welder saysd most are like this now. There is a guy down in Stoke on Trent that will do it that way but it works out more on fills cos you have to travel over there, about 90 mile round trip.

03-05-2012, 14:38	#5
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	there is a fire extinguisher company near to me and they change the top of an extinguisher to the right valve for a welder and then do carbon dioxide (or other inert gasses they use refills and it's pretty cheap

03-05-2012, 15:33	#6
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	not sure pete, it's about 4ft tall and about 18cm wide. I am going onto pub co2 gas asap, My current bottle has ran out.

03-05-2012, 16:04	#7
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Top deal Fez, does he do Argon95 ? We've got some stainless to do Pub gas about 11 quid a bottle

03-05-2012, 18:09	#8
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	It's E&M in aber, Not sure what they do but mine was a co2/argon mix. Anyway just found the receipt for it and I payed alot more than I remembered. £50 for deposit and it's £40 a refill

03-05-2012, 19:27	#9
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Ha just what I paid from them too ;-)