my terrano - Page 3

makeitfit · 19-04-2012, 22:02

Well then inboard is the only option over sticking out

You could mount it on the inside floor if you dont need the space

nice big steel base and a couple of fairleads to redirect the line.

jayjay1990 · 26-04-2012, 15:04

can anyone help me my terrano has the usual stutter at low down revs its never really bothered me but i would like to sort it before it gets worse ive had a look for the micro filter but it wasnt there ive had the same problem on all my terranos but never really tried to solve it

any ideas anyone

762buzz · 26-04-2012, 17:43

Kamsin has same problem with his he tried blanking off his egr valve but still no better
Might be worth asking what else he has already tried

jayjay1990 · 27-04-2012, 19:00

Quote:

Originally Posted by makeitfit

Well then inboard is the only option over sticking out

You could mount it on the inside floor if you dont need the space

nice big steel base and a couple of fairleads to redirect the line.

has you 35s done any damage to your wheel bearings makeitfit just wondering as i had a fourtrack which i killed new bearings with 33s and 32mm wheel spacers.
ive just bought some nice big insa special tracks that measure 34inch just wondering if i should put bearings in before i put them on for piece of mind

makeitfit · 27-04-2012, 20:12

So far so good

and I was running 33s before these 35s

Sames bearings that came with the truck and 180000 miles done

jayjay1990 · 27-04-2012, 20:13

Quote:

Originally Posted by makeitfit

So far so good

and I was running 33s before these 35s

Sames bearings that came with the truck and 180000 miles done

ok ill just chack them over when i get chance

jayjay1990 · 28-04-2012, 09:54

mmmmm off road porn

there is a set of 5 but one is allready on the truck

96terrano · 28-04-2012, 10:14

Mmmm those are nice

jayjay1990 · 28-04-2012, 21:29

and there now fitted

Fez_uk · 29-04-2012, 00:11

animal! Is it all standard steering?

jayjay1990 · 29-04-2012, 07:03

it is yes i would like to upgrade it but what can it upgraded to tho

makeitfit · 29-04-2012, 15:20

I do a mod for well hard steering , it'll be reqd soon

I did a thread on it

jayjay1990 · 29-04-2012, 18:22

what is it that gose wrong on the steering IE what is the weak point

makeitfit · 29-04-2012, 18:41

Where shall I start

Drag link captive ball joints WILL fail. Control rod ends WILL fail. Steering idler WILL burst

jayjay1990 · 19-05-2012, 07:12

Heres a little up date on my rear winch bumper
The winch is already housed inside on a winch Plate then this 3mm outer steel pressing gose over it all.
Just need to make the ends up and cut fairlead hole

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19-04-2012, 22:02	#31
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Well then inboard is the only option over sticking out You could mount it on the inside floor if you dont need the space nice big steel base and a couple of fairleads to redirect the line.

26-04-2012, 15:04	#32
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	can anyone help me my terrano has the usual stutter at low down revs its never really bothered me but i would like to sort it before it gets worse ive had a look for the micro filter but it wasnt there ive had the same problem on all my terranos but never really tried to solve it any ideas anyone

26-04-2012, 17:43	#33
762buzz Senior Member Join Date: Jul 2010 Location: derbyshire Vehicle: nissan pathfinder 2.5 adv Posts: 577	Kamsin has same problem with his he tried blanking off his egr valve but still no better Might be worth asking what else he has already tried

27-04-2012, 20:12	#35
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	So far so good and I was running 33s before these 35s Sames bearings that came with the truck and 180000 miles done

28-04-2012, 09:54	#37
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	mmmmm off road porn there is a set of 5 but one is allready on the truck

28-04-2012, 10:14	#38
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	Mmmm those are nice

28-04-2012, 21:29	#39
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	and there now fitted

29-04-2012, 00:11	#40
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	animal! Is it all standard steering?

29-04-2012, 07:03	#41
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	it is yes i would like to upgrade it but what can it upgraded to tho

29-04-2012, 15:20	#42
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	I do a mod for well hard steering , it'll be reqd soon I did a thread on it

29-04-2012, 18:22	#43
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	what is it that gose wrong on the steering IE what is the weak point

29-04-2012, 18:41	#44
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Where shall I start Drag link captive ball joints WILL fail. Control rod ends WILL fail. Steering idler WILL burst

19-05-2012, 07:12	#45
jayjay1990 Member Join Date: Apr 2012 Location: chesterfield Vehicle: nissan terrano 2 SR Posts: 78	Heres a little up date on my rear winch bumper The winch is already housed inside on a winch Plate then this 3mm outer steel pressing gose over it all. Just need to make the ends up and cut fairlead hole