Spill Pipe for TDi wanted

makeitfit · 13-03-2012, 09:39

HELP ME PLEASE I seem to have erm customised my spill off pipe and so need a new standard one

Anybody got one pleeeeeaaaaasse? Urgent as the truck's going nowhere fast at the mo

(RIP) PLANK · 13-03-2012, 11:02

there's loads on ebay if you know the correct diameter, if you find out post it on here!

makeitfit · 13-03-2012, 11:25

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit

I'll get a pic

Fez_uk · 13-03-2012, 11:29

is there nothing in tanygroes?

(RIP) PLANK · 13-03-2012, 11:43

Quote:

Originally Posted by makeitfit

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit

I'll get a pic

I see, serious customisation error then?

makeitfit · 13-03-2012, 11:59

Quote:

Originally Posted by PLANK

I see, serious customisation error then?

Damn spanner monkey

Spot the mistake

makeitfit · 13-03-2012, 12:00

Quote:

Originally Posted by Fez_uk

is there nothing in tanygroes?

Nope they're modified in exactly the same way

Fez_uk · 13-03-2012, 12:02

ask this guy he seems to always have terrano stuff, although what you needs on a engine and most are sold with them?

http://www.ebay.co.uk/itm/Maverick-T...#ht_500wt_1415

and:

http://www.ebay.co.uk/itm/97-Terrano...#ht_500wt_1183

(RIP) PLANK · 13-03-2012, 12:13

if it's not snapped at a joint, couldn't you put a sleeve over it? even as a temporary fix?

extreme-4x4 · 13-03-2012, 13:55

id go with the sleave too, even rubber would do for a bit .....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too

(RIP) PLANK · 13-03-2012, 14:29

try our member shropshireterranobreakers, he has a few breaking, I can PM his mobile number if you like. A very helpful and reliable young man

Adz · 13-03-2012, 17:53

As above, just sleeve it with fuel hose

Main dealer is your best bit as that's where I got mine

Patch · 13-03-2012, 19:36

You could try your local plumber (if he is a gasfitter as well) to weld a stub on the ring, then you could join it with fuel hose as been suggested

makeitfit · 13-03-2012, 21:05

Thanks guys it's broken right on the fitting so nothing to sleeve

I did consider brazing it if all else failed but horah cnfyfasbs has come up with the goods

makeitfit · 13-03-2012, 21:10

Quote:

Originally Posted by extreme-4x4

.....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too

Waiting for the silicone elbows to turn up, nothing rubbing. this all came about as I was servicing the injectors, but No1 wouldn't undo (properly)

13-03-2012, 09:39	#1
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Spill Pipe for TDi wanted HELP ME PLEASE I seem to have erm customised my spill off pipe and so need a new standard one Anybody got one pleeeeeaaaaasse? Urgent as the truck's going nowhere fast at the mo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13-03-2012, 11:02	#2
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	there's loads on ebay if you know the correct diameter, if you find out post it on here!

13-03-2012, 11:25	#3
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit I'll get a pic

13-03-2012, 11:29	#4
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	is there nothing in tanygroes?

13-03-2012, 12:02	#8
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	ask this guy he seems to always have terrano stuff, although what you needs on a engine and most are sold with them? http://www.ebay.co.uk/itm/Maverick-T...#ht_500wt_1415 and: http://www.ebay.co.uk/itm/97-Terrano...#ht_500wt_1183

13-03-2012, 12:13	#9
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	if it's not snapped at a joint, couldn't you put a sleeve over it? even as a temporary fix?

13-03-2012, 13:55	#10
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	id go with the sleave too, even rubber would do for a bit .....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too

13-03-2012, 14:29	#11
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	try our member shropshireterranobreakers, he has a few breaking, I can PM his mobile number if you like. A very helpful and reliable young man

13-03-2012, 17:53	#12
Adz Senior Member Join Date: May 2009 Location: Roaming Nomad Vehicle: 1995 SWB Terrano Posts: 5,370	As above, just sleeve it with fuel hose Main dealer is your best bit as that's where I got mine

13-03-2012, 19:36	#13
Patch Junior Member Join Date: Feb 2012 Location: NZL Vehicle: Terrano II (Mistral) Posts: 15	You could try your local plumber (if he is a gasfitter as well) to weld a stub on the ring, then you could join it with fuel hose as been suggested

13-03-2012, 21:05	#14
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Thanks guys it's broken right on the fitting so nothing to sleeve I did consider brazing it if all else failed but horah cnfyfasbs has come up with the goods