|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
|
24-06-2010, 23:30 | #1 |
Senior Member
Join Date: Sep 2008
Location: WALES
Posts: 6,295
|
how to clean the maf
ok im going for a new k&n filter. but to get the most out of it .... how do i clean the maf
|
25-06-2010, 07:53 | #2 |
Senior Member
Join Date: Mar 2009
Location: Huddersfield
Vehicle: Terrano 03 LWB
Posts: 6,947
|
well, i may be wrong, but all i did was empty some of my electrical contact cleaner into a little plastic drink bottle, cut thebottom off the bottle, and placed the MAF in that so that the wires were submerged. that was well before Christmas, and havent had any trouble since. doing it this way saved me scrubbing with cotton buds etc, as this leaves tiny bits of cotton on the wires, cant be good...
|
25-06-2010, 10:33 | #3 |
Senior Member
Join Date: Sep 2008
Posts: 4,705
|
flea bay cheap and efficient aerosol delivered to the door
|
25-06-2010, 10:57 | #4 |
Senior Member
Join Date: Mar 2010
Location: peoples democratic republic of west yorkshire
Vehicle: " alice "
Posts: 10,473
|
|
25-06-2010, 16:55 | #5 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Contact cleaner I used was in an aerosol with a straw just like WD, all I did was give the thin wire a good squirt with the straw. Also cleaned the mesh with the same stuff but gave the mesh a buff up with a rag afterwards.
Jim |
25-06-2010, 22:59 | #6 |
Senior Member
Join Date: Apr 2008
Location: on the beach WEST WALES
Vehicle: Maverick TDi BLACK mmm
Posts: 15,136
|
What he said
|
25-06-2010, 23:15 | #7 |
Senior Member
Join Date: Mar 2010
Location: peoples democratic republic of west yorkshire
Vehicle: " alice "
Posts: 10,473
|
in our lasses old x trail i just sprayed contact cleaner through the mesh ... the used a air line ... mind you , it fuffed up not long after
|
26-06-2010, 07:41 | #8 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Not sure if brake cleaner is a little harsh. This is the stuff I've used http://www.maplin.co.uk/Module.aspx?ModuleNo=4153.
There is a very thin piece of wire runs through the air flow chamber, this is the bit that is so delicate. That servisol wont be wasted though, it's cracking stuff. If you have something with a noisy volume control that crackles when you go near it, sorted. Jim |
26-06-2010, 23:38 | #9 |
Senior Member
Join Date: Sep 2006
Location: St Albans Herts
Vehicle: 1997 Mav 2.7tdi lwb
Posts: 1,377
|
Cleaned mine with a bit of meths on a cotton bud.
Brian |
|
|