Q for terra.... springs

[extreme-4x4]

ok i fitted some t2 lwb standard springs on a swb fronterra they fit fine and have given me a 1 inch lift on the back

so im i right in thinking if i fit some of your lwb + 2" + 20 i will get a further 2" lift

i have room for a further 2" lift.... just wondering if your springs will give me the big lift


thanks in advance extreme

[zippy656]

and the front is there room on the tortion bar to go up as well??

[extreme-4x4]

can get 4-5 inches on the front off the torsion bars

[Terranosaurus]

Can you measure me the fitted (compressed) length of the std LWB T2 springs on the Frontera and I'll do the maths and work it out - might not be exactly 2" but should be thereabouts - very interesting though as a mate of mine has been asking about Fronty springs was for LWB though - lots of complications with fronties different series to worry about and stuff T2 is easy same suspension from first to last.

[extreme-4x4]

compressed on the truck they measure 290mm or 11.5 inches

thats the lwb t2 springs on fitted to the fronterra

[Terranosaurus]

ok got Amy to et fed and to bed now will do calcs a bit later on

[Terranosaurus]

Based on your measurements and my calcs they should give 2.4" additional lift over Std LWB T2 springs ie a SWB fronty is lighter at the rear than a LWB T2.

What age/series/marque/whatever of frontera is this on please?

[extreme-4x4]

Originally Posted by Terranosaurus

Based on your measurements and my calcs they should give 2.4" additional lift over Std LWB T2 springs ie a SWB fronty is lighter at the rear than a LWB T2.

What age/series/marque/whatever of frontera is this on please?

2 litre petrol swb A series on a p plate
same engine as the cavalier so they tell me


ok next question is do you have any and how much,
if you have we will have some , and let you know how they go
might be another way of selling your springs if they work on frontera 's too