a bit more .... but not black

extreme-4x4 · 18-03-2009, 23:02

i know !

jims-terrano · 18-03-2009, 23:26

So why do you feel the need to have machine guns in the bumper

Thomas-the-Terrano2 · 18-03-2009, 23:37

neat, presume hilift mounts. like way indicators are visible thru gap.

maybe take one tube, combined at corner, along wings over arches
and down to form rock sliders then up over rear arches and split in
2 again either side of rear lower clusters merging to meet below step
bumper, more hilfts there and in rock sliders???????

Deleted Member S · 18-03-2009, 23:40

Different

Are you thinking of useing a high lift jack on the bumper

just that unless to have put a lot of renforcement behind the bumper you'll just lift the bumper off the front of your motor

extreme-4x4 · 18-03-2009, 23:50

well the winch plate is being made now. that will fixed to the front cross member not the one visible the one behind it and to the chassis rails for the bumper mounts so that will be solid in there. also new bumper the same as in pic but welded better and braces from the front cross member to the bumper.also being made

this was the dry run to see if it works.... the rocket launchers if (you like) are bolted and welded to the chassis bumper mounts. it will high lift now, but until its braced there is movement

NNMan · 19-03-2009, 20:48

I like the Idea especially going over to the sliders but Bumpers welded to the chassis are illegal in the country.

makeitfit · 18-03-2009, 23:37

Oh thats easy, they're to blast the old biffers and lane hogs off the chuffin' road

I want some..............but in black mmm

18-03-2009, 23:02	#1
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	a bit more .... but not black i know !

18-03-2009, 23:37	#3
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	neat, presume hilift mounts. like way indicators are visible thru gap. maybe take one tube, combined at corner, along wings over arches and down to form rock sliders then up over rear arches and split in 2 again either side of rear lower clusters merging to meet below step bumper, more hilfts there and in rock sliders??????? __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

18-03-2009, 23:40	#4
Deleted Member S Senior Member Join Date: Jun 2007 Posts: 2,711	DifferentAre you thinking of useing a high lift jack on the bumperjust that unless to have put a lot of renforcement behind the bumper you'll just lift the bumper off the front of your motor

18-03-2009, 23:26	#2
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	So why do you feel the need to have machine guns in the bumper

18-03-2009, 23:50	#5
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	well the winch plate is being made now. that will fixed to the front cross member not the one visible the one behind it and to the chassis rails for the bumper mounts so that will be solid in there. also new bumper the same as in pic but welded better and braces from the front cross member to the bumper.also being made this was the dry run to see if it works.... the rocket launchers if (you like) are bolted and welded to the chassis bumper mounts. it will high lift now, but until its braced there is movement

19-03-2009, 20:48	#6
NNMan Senior Member Join Date: Jul 2007 Location: West Scotland Posts: 575	I like the Idea especially going over to the sliders but Bumpers welded to the chassis are illegal in the country.

18-03-2009, 23:37	#7
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Oh thats easy, they're to blast the old biffers and lane hogs off the chuffin' road I want some..............but in black mmm