Mrs 3 Ltr MOT today

solarman216 · 11-08-2020, 18:00

Yep up for the test today, a bit overdue but took advantage of the 6 month deferment, gave me time to sand blast it all and spray underseal every where, replaced both bottom ball joints as boots were split together with the CVJ boots, across axle brake lines and NS rear seat belt mount needed a small plate, also sorted the sticking speedo, clean bill of health for another year, Rick

Blocky10 · 11-08-2020, 20:35

Good man. Happy wife happy life

Flying Torquewrench · 11-08-2020, 22:17

Well done Rick!

Just a word of caution. Be careful with the 6 months MOT extension as not every insurance company allows you to use it and invalidates your insurance! (Not an issue for you Rick, more for others reading this)

solarman216 · 12-08-2020, 00:56

Sorry did not take any pics, what with the sand and then the black stuff, was just not the place for a camera, suffice to say took 12 20Kg bags sand and 9 x 1ltr cans of spray underseal, re the insurance aspect they will find any excuse to invalidate a claim, and yes happy Mrs is a happy life and **** the world, it has gone beyond mad, Rick

panelbeater · 12-08-2020, 09:33

good job there rick.

Wallace · 12-08-2020, 19:31

Do you use kiln dried sand through an air sand blasting gun Rick? Works well, have you tried it through a jet wash attachment? Good media & cheap but worth mentioning the danger of silicosis attached to using it dry for those that may want to try.

Mike

11-08-2020, 18:00	#1
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Mrs 3 Ltr MOT today Yep up for the test today, a bit overdue but took advantage of the 6 month deferment, gave me time to sand blast it all and spray underseal every where, replaced both bottom ball joints as boots were split together with the CVJ boots, across axle brake lines and NS rear seat belt mount needed a small plate, also sorted the sticking speedo, clean bill of health for another year, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

12-08-2020, 00:56	#4
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Sorry did not take any pics, what with the sand and then the black stuff, was just not the place for a camera, suffice to say took 12 20Kg bags sand and 9 x 1ltr cans of spray underseal, re the insurance aspect they will find any excuse to invalidate a claim, and yes happy Mrs is a happy life and **** the world, it has gone beyond mad, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

11-08-2020, 20:35	#2
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Good man. Happy wife happy life

11-08-2020, 22:17	#3
Flying Torquewrench Senior Member Join Date: May 2011 Location: Worcestershire Vehicle: Nissan Patrol Y61 2.8TD Posts: 1,152	Well done Rick! Just a word of caution. Be careful with the 6 months MOT extension as not every insurance company allows you to use it and invalidates your insurance! (Not an issue for you Rick, more for others reading this)

12-08-2020, 09:33	#5
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,638	good job there rick.

12-08-2020, 19:31	#6
Wallace Senior Member Join Date: Aug 2018 Location: Middlesex Vehicle: '97 Terrano II 2.4 Xtreme Posts: 368	Do you use kiln dried sand through an air sand blasting gun Rick? Works well, have you tried it through a jet wash attachment? Good media & cheap but worth mentioning the danger of silicosis attached to using it dry for those that may want to try. Mike